C3 LT-1 Aluminum Intake For Sale
 

I was about to list this on e-Bay but would rather sell it to someone here if there is any interest.

1971 – 1972 LT-1 (Z-28) Intake manifold #3959594

This is an original GM intake from a 1971 Chevrolet Corvette. I used it on a 350 engine in an autocross race car for several years. I rebuilt the engine as a GT-1 road race car and the manifold was removed and hasn’t been used for years.

It is in very good condition. The distributor hold down hole has been Heli-coiled as have the thermostat housing bolt holes. All the other holes have good aluminum threads. There is a heater hose connector on the front and there is an aluminum plug in the top of the front water passage. These have been in there for years and I am afraid I might strip the threads if I tried to remove them.

I’d like $450 plus $25 for shipping (unless you are local) for the manifold. I can take VISA, MasterCard or Pay-Pal.


http://home1.gte.net/ljohns/Forum%20...1%20Intake.jpg

I am located in Wesley Chapel, Florida.