Tiger Shark front bumper
Well the Tiger Shark bumper I got off of Ebay came in today. Really doesn't look in too bad of shape at all.
http://www.corvetteflorida.com/pics/..._bumper_01.jpg http://www.corvetteflorida.com/pics/..._bumper_02.jpg http://www.corvetteflorida.com/pics/..._bumper_03.jpg No cracks that i can see, and all the mounting tabs look OK. But even if my C5Z were black, it would probably need to be repainted anyway. But looking from it from the back, obviously the paint applied there wasn't meant to last long at all, as it is curling up and flaking off. http://www.corvetteflorida.com/pics/..._bumper_04.jpg http://www.corvetteflorida.com/pics/..._bumper_05.jpg http://www.corvetteflorida.com/pics/..._bumper_06.jpg http://www.corvetteflorida.com/pics/..._bumper_07.jpg |
And it looks like I'm going to have to fix some of those screens, particularly the rubber molding around the edges of them.
http://www.corvetteflorida.com/pics/..._bumper_08.jpg http://www.corvetteflorida.com/pics/..._bumper_09.jpg http://www.corvetteflorida.com/pics/..._bumper_12.jpg http://www.corvetteflorida.com/pics/..._bumper_11.jpg Looks like the splitter, if I decide to put it on the car, is going to need to be fixed too. Looks like it might have gotten pushed up a bit on the passenger side, as it appears bowed in the pictures at the beginning of this thread. http://www.corvetteflorida.com/pics/..._bumper_10.jpg I'm trying to figure out who manufactured this bumper, but this is the only sort of identifying number or any sort I can see on it. http://www.corvetteflorida.com/pics/..._bumper_13.jpg Well, I'll scrape what paint I can get off of the back of the bumper and fix anything that I think I can tackle to have it ready for whenever I want to face the paint job. I'm still playing around with the paint on the blue car, and having pretty good luck with the results I'm getting from my efforts. But I think the hood cracks will be the deciding factor as to whether I get the entire car repainted or just try to get the TS bumper painted to match the rest of the car. Still waiting for some stuff to come in before I tackle trying to fix those cracks. Having never done this before, I don't have a clue about what to expect. |
TIGERSHARK
Hi,I also bought a used tigershark ,the same one that you bought.In fact the paint was pealing off the back.
I use a compresser with a air gun.It removed 80% of the pealing paint.Then I used scotch bright pads to scrub off the rest.A orbital sander will go threw it very easily. If you don't want to have a disaster when you paint the bumper be sure to sand off all the paint and primer as it is most likely the same crap as on the back. Then prim it .with bumper primer. ps be sure to have cold beer on hand as you will need a few. Cheers Darren |
Quote:
BTW, I contacted Starcraft and asked them if they could identify the bumper for me from the pics I took. Here's the reply I got. Quote:
|
The black rubber molding around the screens was tougher to work with than I thought it would be. It's very rigid plastic, not rubber at all, and the slit for the screen to go into is razor thin and tight. I had to use a thin flat bladed screw driver to pry the edges open while trying to shove the screen in one wire at a time. Meanwhile the wire is pretty darn sharp, so I got jabbed a few times in the process. All in all this was a bugger to work on. I would imagine trying to do this with the bumper still on the car would have been pretty much impossible to do. Having it sitting on my workbench was tough enough doing it. I wire tired the moldings to the screen, so hopefully I won't have to do this job ever again.
Also found that the front of the turn signal lamps weren't bolted into the mounts for them at all. The mounting holes on the lamps don't reach the tabs on the bumper, so I just wire tied them in place. Maybe whoever I get to do the mounting and painting of the bumper can fix that for me. The black paint on the inside was just falling off while I was working on those screens, so I guess it won't be very tough at all getting it all off. If I felt like cranking up the pressure washer it would probably make short work of getting that crap off. |
Try using a heat gun on that molding Rich. Just don't get it too hot.
|
Yeah, I thought maybe heat would make it more pliable, but then I couldn't see how you would be able to handle that hot plastic. It's too fine of work to use gloves with.
Well, it's done now anyway. But thanks for the suggestion. |
Kind of looks funky from the back with all the wire ties, but hopefully it will hold those moldings onto the screens so they don't come loose again.
http://www.corvetteflorida.com/pics/...rk_back_01.jpg http://www.corvetteflorida.com/pics/...rk_back_02.jpg http://www.corvetteflorida.com/pics/...rk_back_03.jpg http://www.corvetteflorida.com/pics/...rk_back_04.jpg The splitter is pretty messed up. It's definitely warped on the passenger side. And the urethane has separated from the foam core on that side as well. http://www.corvetteflorida.com/pics/ts_splitter_01.jpg http://www.corvetteflorida.com/pics/ts_splitter_02.jpg http://www.corvetteflorida.com/pics/ts_splitter_03.jpg http://www.corvetteflorida.com/pics/ts_splitter_04.jpg http://www.corvetteflorida.com/pics/ts_splitter_05.jpg Then I had to wire wrap the fronts of both of the side turn signal lights to the tab on the bumper, since they don't mate up properly. Not sure of what sort of permanent fix could be done. http://www.corvetteflorida.com/pics/...e_light_01.jpg http://www.corvetteflorida.com/pics/...e_light_02.jpg Hopefully whoever I can find to do the painting of at least the bumper can fix some of this stuff for me to make it look right when it gets mounted on my car. |
2 suggestions.......first, go around the edges of the wire/plastic molding with some
black RTV sealant. That will probably eliminate the need for ZIP ties. Second, maybe a "U-BOLT" of the proper size with a piece of flat metal on top to use on the front of the turn signal lights. :shrug01: Looks like you've been doin' some work on it though, and it's getting better and better. Get some before and after shots of the front of the C5Z, cause I want to compare looks. I think it will look better in my opinion. Anything to get rid of the front license plate mount.........UGH! Andy :wavey: |
Quote:
Quote:
Quote:
If I ruin this one, it's going to probably be pretty darn tough to find a replacement. Heck, maybe when mounted that will pull the shape back the way it should be enough so that it doesn't matter. :shrug01: Yeah, I will be taking pics. Don't I usually? :lmao: |
All times are GMT -4. The time now is 05:33 PM. |
Powered by vBulletin® Version
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.