WTT (Want To Trade) Full drag package for FI C6
 

Looking to trade my drag car, 24’ enclosed trailer, golf cart and all safety gear for a C6 that’s either turboed or supercharged. (Prefer widebody and the higher the options the better)

Our local track closed so that leaves me with several hours drive one way to be able to enjoy the car, so I’d like a fun, fast street car my wife and I can enjoy and fill the “go fast” void for me.


93 Fox Body Notchback Mustang

LS 413 stroker (LQ4 line bored and stroked, balanced Forged DSS pistons + .040" w/ rings Forged 4340 I beam rods w/ ARP rod bolts Forged 4340 Skat crankshaft w/ 4" stroke) block done by Desert Auto Works

Patriot stage 2 #806 heads ported by AMMFAB to 73cc with brand new Brian Tooley Racing .660” titanium valve train

LS1 rockers with Brian Tooley Racing v2 trunnion upgrade (zero run time)

LS7 lifters

Brian Tooley Racing pushrods

LS9 head gaskets

All hardware ARP throughout

Powerbond harmonic balancer

Lil Jon Motorsports stage 4 boost cam brand new

Holley hi ram coated black with 102mm throttle body all brand new

Rossler “Terminator 3” Th400 RMVB with B&M pro ratchet stealth shifter

Davis technologies bump box

Neal Chance converter spec’d to setup

TCI 168t flexplate

Holley HP stand alone EFI

Holley digital dash Display

Leash Electronics relay board

Billet Borg Warner S480SXE w/Race cover & billet J wheel brand new

Built 8.8 and arb

Strange Spool

Moser Axles

5 lug conversion with extended studs

Weld RTS wheels with brand new 0 pass Mickey Thompson ET street 275/60/15

10 gal fuel cell

Magnafuel fuel pump

MSD wires to remote mounted coils under fenders (could be done cleaner)

NGK V-Power BR7EF (#3346) sparkplugs (gapped to .022)

Fore fuel regulator

Dual 44mm VSRacing.net wastegates

Frozen boost air over water intercooler with icebox

VSRacing.net BOV

“Scramble” solenoid boost control button on shifter handle (not yet wired)

8.5 Roll Cage

Kirkey seats with covers and jegs harnesses all brand new

Detachable steering wheel w/buttons for

transbrake and bump box

Line Lock

Strange Coilovers rear

Team Z mini tubs

Team Z adjustable rear trailing arms

4 linked Rear axle w/ anti roll bar

Mezier electric water pump (fresh rebuild from Meziere)

160# injectors

Mishimoto 2000CFM fan on drag radiator

Team Z sub frame connectors

AJE front member

Fully adjustable QA1 front coilovers front w/camber plates and strange rears

UPR camber plates

Full ScottRodFab interior

Racecraft rear wing

Stroud parachute

Co2 tank installed but not filled or hooked up to wastegates yet

Accusump not installed yet

Aftermarket powder coated black gen iv valley cover with polished hardware for clean look under intake

Always maintained optima yellow top in trunk w/cut off switch

Brand new starter

Brand new alternator

Custom alternator bracketry

-10AN lines coming off powdercoated shaved and filled valve covers to catch can hidden under fender

All vac lines hidden and ran through frame rails and meet to vac block hidden in wiper cowl

Tried to hide as much wiring as possible, but there’s still room to improve.

Tig welded pie cut 3.5” aluminum chargepipe powdercoated black

Exhaust dump out the fender

All hot side wrapped in black

EVERYTHING SFI CURRENT BUT THE CAGE (not yet certed)

Most parts brand new and unused

Car should easily be in the low 8s or better with its 4 digit power

Interior could use some work. Most of the factory plastics were broken, so I took them out.

The car does currently need a tune in it.


The trailer is a 24’ wells cargo

9k winch

“curb door” (so you can open car door and get out)

I have a craftsman 3600w generator on the tongue that currently doesn’t work that I’ll throw in for free. I’ve been too lazy to diagnose it.

Fresh bearings, just installed and greased

Brakes just adjusted

New tires

Spare wheel and tire

New tongue jack


Golf cart is an EZGO

Brand new batteries

Fresh refurbed charger

Full windshield

Full enclosure with doors

Two new tires and rims

Tow hitch (used to pull a little trailer I built for family/buddies LS Fest)


Safety gear is all new

Simpson Diamondback helmet with custom airbrush from REK out of Florida

Z tech HANS device

Crow neck brace (used-spare, a little dirty)

Simpson gloves (szLG)

Impact shoes (sz10)

Bell jacket (szLG)

Bell pants (szLG)


I would be willing to drive half way to make the trade, or you’re more than welcome to come to my home. I have a mother in law apartment in a loft over my detached shop where you can stay privately during your visit if need be.

Attachment 48304193Attachment 48304196Attachment 48304195Attachment 48304197Attachment 48304192Attachment 48304194Attachment 48304199Attachment 48304198Attachment 48304201Attachment 48304200

Attached Images https://www.corvetteforum.com/forums...6-photo133.jpg https://www.corvetteforum.com/forums...6-photo148.jpg https://www.corvetteforum.com/forums...6-photo246.jpg https://www.corvetteforum.com/forums...6-photo503.jpg https://www.corvetteforum.com/forums...c6-photo18.jpg https://www.corvetteforum.com/forums...6-photo239.jpg https://www.corvetteforum.com/forums...6-photo903.jpg https://www.corvetteforum.com/forums...6-photo404.jpg https://www.corvetteforum.com/forums...6-photo555.jpg https://www.corvetteforum.com/forums...6-photo210.jpg



Source...