Why oil in the intake air charge is BAD...
 

To many don't understand the need for a proper oil seperating catch can, so here is a short explanation as to why you don't want that oil entering your combustion chamber:

GM in their design accepts oil in the intake, but there is nothing good that comes w/it.

1. You want only air & fuel in the combustion chamber, oil does not burn well and any oil included in the intake air charge will result in less energy released per explosion, and it also reduces the useable octane of the fuel your using....resulting in detonation and less power & less fuel economy.

2. The oil does not burn completely and leaves a deposit that builds up on your piston tops & valves. This causes the burn to be uneven & results in hot-spots on the piston top, and the deposits on the valves reduces the velocity, or volumetric efficiency again negatively affecting power.

3. The carbon buildup left by the oil is a very hard & abrasive compound that as small pieces break off can be caught between the cyl wall & piston causing score marks and shortened engine life.

So no!!! Nothing good comes from oil in the intake, but to meet emission requirements GM & every other manufacturer of engines accepts it as a side effect of a closed crankcase ventilation system. A good, proper working oil separating catch can is the only good solution.
:thumbsup:

Tracy,

Chris is going to be calling you about getting one of these for my car. Please nag him if he forgets. Did he get the throttle body from you yet? I think he said that he has, but I can't remember. Got too much crap running through my mind lately...

Thanks for the writeup. :thumbsup:

Will do. TB is getting machined right now.:thumbsup:

Tracy
the catch can works great, it's been on for 6,000 miles and 2 oil changes since I built my 427 stroker, I had an issue and had to remove my intake manifold and to my surprize, NO OIL at all, I empty the can every oil change
and get 1.5 oz. :thumbsup:
phil

Tracy actually sent Chris a dual catchcan for my engine build. I'll have to try to remember to get a photo or three of it next time I am out at the shop.

Here's a pic of the dual catch can that Tracy sent to Chris for my new engine...

Now if I can ONLY get a new engine that isn't flawed..... :rolleyes: