I got the wire soldered onto that remnant of the blue wire spliced into the gray wire. I really couldn't do much about cleaning up that original solder job, but since I didn't have any problems in the past with the scavenge pump mysteriously dropping out, hopefully the joint is still good. I used to repair computer circuit boards in my younger days and learned how to make a GOOD solder joint. Something I have seen a lot of people fail to do properly.
Anyway, I ran the new wire through the STS wiring harness up to the relay and put a connector on it to mount to the relay. But I'll test it first when my battery gets charged up to make sure it is the correct wire I need.
Hopefully that will fix the problem with the power going to the scavenge pump for me.
__________________
|