The ALL Florida Online Corvette Club - View Single Post

europlateconcepts · 03-07-2013, 08:13 PM

Hi,I also bought a used tigershark ,the same one that you bought.In fact the paint was pealing off the back.
I use a compresser with a air gun.It removed 80% of the pealing paint.Then I used scotch bright pads to scrub off the rest.A orbital sander will go threw it very easily.
If you don't want to have a disaster when you paint the bumper be sure to sand off all the paint and primer as it is most likely the same crap as on the back.
Then prim it .with bumper primer.
ps be sure to have cold beer on hand as you will need a few.

Cheers Darren

03-07-2013, 08:13 PM	#3
europlateconcepts Member Join Date: Mar 2013 Location: Vancouver Bc Posts: 1 Name :	TIGERSHARK Hi,I also bought a used tigershark ,the same one that you bought.In fact the paint was pealing off the back. I use a compresser with a air gun.It removed 80% of the pealing paint.Then I used scotch bright pads to scrub off the rest.A orbital sander will go threw it very easily. If you don't want to have a disaster when you paint the bumper be sure to sand off all the paint and primer as it is most likely the same crap as on the back. Then prim it .with bumper primer. ps be sure to have cold beer on hand as you will need a few. Cheers Darren