The ALL Florida Online Corvette Club - View Single Post - Presidential Detailed: 1991 Acura NSX

presidential_detail · 03-26-2009, 09:09 PM

The car was pretty rough after removing all the oils from the previous waxes, etc.
I started with a test spot on the hood to see how much work this thing would need, and pleasantly it only took a few passes with M105/8207 to correct.

I decided this area would be best to start with..

After M105/205..the lighting makes it look worse than it really was.

As you could see here, the finish is good, but not good enough!

But after 3m UF, it looked MUCH better! You can notice the flash is more contained to itself.

So now that I had my process down, I could begin my way around the car.
Headlight Before..

After 105/205..

After 3m UF..

The center of the hood..

After 105/205..looks good right?

My camera flash tells me otherwise, I need one of those handy brinkman lights!

After 3m UF..

03-26-2009, 09:09 PM	#2
presidential_detail CQuartz FINEST Installer Join Date: Mar 2009 Location: Tampa, FL Posts: 203 Name :	The car was pretty rough after removing all the oils from the previous waxes, etc. I started with a test spot on the hood to see how much work this thing would need, and pleasantly it only took a few passes with M105/8207 to correct. I decided this area would be best to start with.. After M105/205..the lighting makes it look worse than it really was. As you could see here, the finish is good, but not good enough! But after 3m UF, it looked MUCH better! You can notice the flash is more contained to itself. So now that I had my process down, I could begin my way around the car. Headlight Before.. After 105/205.. After 3m UF.. The center of the hood.. After 105/205..looks good right? My camera flash tells me otherwise, I need one of those handy brinkman lights! After 3m UF..