Up for sale is my personal 2001 Corvette Z06. Florida born and raised, clean title, with roughly 122k, well maintained miles. (Driven as a 3rd owner, 37 year old professional) with recent Super Jet Black paint applied professionally by Southern Customs in Chattanooga with 5 year warranty.
Car has been modified and professionally tuned by Vengeance Racing in Atlanta (7 months left on tuning updates as needed..) Mods are aggressive, but car has been used as a semi daily driver recently and has functioned perfectly as such. (Still average 30mpg on interstate driving!)
Mod list below, with recent additions of:
GM Hot Wires $66.00
Accel 42LB/440CC INJECTORS $299.99
NGK TR6s $30.
Custom Cam (228/240 .612" .612" 111 LSA) $450.
Comp Cams Hi-Tech Pushrods, 5/16" diameter, 7.400" length (set of 16) $129.
ID Locators for LS1 $30.
LS1 Valve Seals $12.
Crane Cams Dual Valve Springs for LS1 1.275" outside diameter $159.
Titanium Dual Valve Spring Retainers for LS1 (1.230", 8mm) $126.24
GM LS1 Crankshaft (Harmonic Balancer) Bolt $4.99
Cometic Custom Head Gasket .40in $190.00
GM LS7 Lifters $114.00
Dart PRO1 225cc Heads (Ported / Finished & Coated) $1,500.00
Hurst Billet Plus Shifter $199.00
Hurst Classic Shift Knob $49.99
Monster Clutches Level 6 900+hp/tq Heavy Duty pressure plate/Sintered iron clutch/Billet steel flywheel $875.00 Induction: 12/18/07
Halltech Venom Intake $349.00
Kooks Long Tube Headers / Coated Off-Road Catless X-Pipe $1,460.00
B&B Triflo Bullet Exhaust $729.00 (Car is not running cats, but throws NO codes, and has passed all emissions recently. Due to exhaus setup, car is throaty and, well, a bit loud.... As intended) (Multiple videos available to hear note.)
Wheels: 11/08/07 Front: C6 ZO6 Black w/ Red Pinstripe 17x9.5 - Rear:C6 ZO6 Black w/ Red Pinstripe 18x10.5 $247.50
Auto Meter Dual Gauge Pillar for C5 and Z06 Corvette $79.95
Innovate Motorsports 3781 XD-16 Wideband Standalone Gauge Kit (2 1/16 52mm) (LC-1 Sensor Bung/Plug and XD-16) $380.65
Raptor Miniature Shift Light $105.00
NEW Hood and Trunk badges
Recently repainted calipers in red
BF Goodrich KDW T/A tread in rear
2012 GM Z06 shocks
Lowered on factory lowering bolts
Pfadt poly bushings all arround
Moog sway bar end links and tie rods
Drilled and slotted, front and rear rotors, new ceramic, low dusting pads
New Windshield, new windshield molding over window, and new rear windshield stripping
Clear front corner lamps running "Switch Back" bulbs. (Dual color LED running lights.)
Only real problems with vehicle are simple, non-perforance affecting fixes, but items I have not yet taken the time to resolve. These are: Traction Control/ABS module is in need of a rebuild - this is a simple removal of module, shipped off and fixed. ($50.00 fix from
www.absfixer.com.) Vehicle runs flawless without the module installed, but will be lacking ABS/TCS until module is rebuilt. Also steering colum lock light is on and in need of service. (Typical problem with this generation of Vettes where as the colum lock fails.) This also does not affect operation, other than the light showing before resetting.
Exterior of car would be a 9 out of 10 with no real flaws that a good detail would not resolve. As mentioned car was painted relatively recently with Super Jet Black by Southern Customs here in Chattanooga, using premium paint and clear. (5 year warranty still remaining on the paint job.)
Interior of the car would be an 8 out of 10. Only real flaw would be a smaller tear in the drivers seat at the lumbar area, which unfortunately is pretty common on this seat due to how people enter and exit. Other than this, dash is immaculate, as is passenger seat, steering wheel, carpet, etc.
Car is complimented daily, both on the sound and the appearance, and honestly runs very strong. Title is clean and in hand, and ready to go home to the right buyer. Asking $19,800.
Email me for immediate response, additional pictures and video links and viewing/test drive.
I do have SEVERAL pictures and videos I will gladly share as requested.
Source...