Sparco,Planted,Motul,Brake Cooling, Driver Safety, Harness Bars

[XP Motorsports]

Sparco EVO II US Competition Seat w/ Steel Side Mounts (Black)/Planted Seat Bracket w/Schroth Profi II-6 Seat Belt 6 point (Black) Competition Package Driver Side

Competition Package Includes
(1) EVO II US Competition Seat Black
(1) Sparco Competition Side seat Mounts Black
(1) Set Schroth Profi II-6 Seat Belt 6 point Black
(1) Planted Floor Mount Seat Bracket Black Driver Side

http://www.xplosiveperformance.com/S...de_p_3413.html

$1,389.95
Shipped free lower US

C4/C5/C5ZO6/C6/C6ZO6 Hardbar Coupe Harness Bar

Allows Perfect Placement Of Performance Belts

* Allows Belts To Hold You Securely In The Seat So You Concentrate 100% On Driving
* Bar Is Stiffer, Stronger & Lighter Than Any Other Bar
* Supplied In Black Powder Coating Wrinkle Finish
* Shown In Bright Metal For Photo Purpose Only Hardbar's Harness Bar uses your stock belts or any other racing belt with a wrap around loop. The bar is easy to install and remove. It's made of aerospace aluminum and weighs less than 6 pounds. In addition, the bar stiffens the chassis. Standard seat belts are routed over the backrest and sport seat can do either over or through the backrest. It does require minor modification to the plastic interior panels, template included.
Pre-cut panels available.
http://www.xplosiveperformance.com/C...es_p_3414.html

$360.00

ESS 5.0 Liter AFFF Fire Suppression System

Aqueous film forming foams (AFFF)

The 5.0 liter system is a racing approved system by SCCA, PRO-SCCA, Trans Am, World Speed Challenge, American LeMans, NASA, and others. This is a 4 nozzle, 3 zone system utilizing the newest T-style nozzle, bulkhead fitting, 20 ft of aluminum tubing and the other features of the 2.3 liter system. This system is available as an owner rechargeable system and as a SFI 17.1 compliant system. The SFI 17.1 compliant system requires that the systems be shipped full, sealed, and certified for 2 years of service. We offer a re-certification program for both 17.1 and non-17.1 systems. .
This system was created for the hardcore racer. It is designed to provide three zones of coverage - driver, engine, and fuel cell. The aluminum cylinder and hardware keep down the weight and yet the 5 liters of suppression agent provides better coverage than the competition. The 5 liter system will produce approximately 30 liters of foam when activated, enough to subdue the most stubborn fire. In non SFI 17.1 compliant systems, you clean up with water and can recharge the system at the track with a recharge kit (retail under $70) and fresh water. The SFI 17.1 compliant version of the 5.0 liter system requires that the system be shipped back to us for recertification. We offer a re-certification program for both 17.1 and non-17.1 systems. The stainless steel t-bolt mounting brackets allow easy access for tech inspection and storage during the off season.


http://www.xplosiveperformance.com/E...m-_p_2916.html

$510.00



Motul RBF600
http://www.xplosiveperformance.com/M...00-_p_648.html

Motul RBF600 is the best high-temperature Brake Fluid and preferred by many tuners and race teams. Its specifications and labratory results exceed that of DOT 5 silcone based fluid, but still retains the benefits of Glycol based fluid by lubricating the ABS pump and not deteriorating caliper and Master cylinder seals
100% Synthetic Brake and Clutch fluid. Compatible with all Dot 3 and 4 fluids. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.
500ml bottles

$17.95

Motul RBF600 Case of 12
http://www.xplosiveperformance.com/M...12_p_3237.html
$215.40
Free Shipping Lower US

05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct

http://www.xplosiveperformance.com/0...ct_p_3389.html

XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to loose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.

Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
(1) Horn relocation Bracket
Mounting Screws
Instructions

$273.97