2003 Corvette Z06
Anniversary Edition
59,XXX-miles
$24,000 OBO
Florida
Vararam cold air intake
GM LS2 90mm throttle body
FAST 92mm intake manifold
AFR 215cc cylinder heads; 61cc chambers, 100% CNC-ported
Comp Cams 228/232, .582/.582, 114-LSA camshaft
Hardened pushrods, AFR dual valve springs, stock rockers
LG long-tube headers, 3-inch X-pipe, Z06 titanium exhaust
445-rwhp / 390 lb-ft of torque, calibrated by Howard Tanner
Redline Motorsports installed the AFR cylinder heads and FAST 92mm intake manifold in February ‘12 for an technical article in GM High-Tech Performance magazine. You can read about it (and see detail pictures of the installation) in the May issue. The Z made 419-rwhp baseline and 445-rwhp with the new parts. Torque curve was improved, as was the throttle response and overall driveability of the car.
Zip Products C6 Z06 brake upgrade
Hawk brake pads, 2-piece Coleman rotors, upgraded bolts
C6 brakes installed by AntiVenom for a technical article in Vette Magazine. These are OEM C6Z brakes with 2-piece rotors, the kit is from Zip and included everything!
19x9.5-inch Modulare M6 front wheels
20x10.5-inch Modulare M6 rear wheels
3-piece construction, brushed and clear coated centers, chrome lip, ARP bolts
Nitto INVO tires, maybe 5-thousand miles of wear, 8/10
SLAMMED on stock bolts… very low. Looks amazing; drive carefully.
Quartermaster single disc LS clutch (
[FL] FS: 2003 EB Z06 / 445-rwhp, Modulare wheels, C6Z brakes, AFR Heads, etc...
Linear Mode
