The ALL Florida Online Corvette Club








Corvette Top Sites

Go Back   The ALL Florida Online Corvette Club > General Corvette Forums > Maintenance, Mods, & Tips

      Photo Gallery Screen Saver!      

Maintenance, Mods, & Tips Mods | Tips | Repairs & Troubleshooting

Reply
 
Thread Tools Display Modes
Unread 08-02-2017, 08:50 PM   #1
mrr23
The Alignment Guy
 
mrr23's Avatar
 
Join Date: Aug 2007
Location: orlando, fl
Posts: 1,337
Name : Robert J Hinton
mrr23 is on a distinguished road
Default medium brake kit

seeing as a big brake kit costs upward of 3000.00 and moving to c6 z06 brakes is about 1200.00, i decided to go with the, what i dub, the medium brake kit. others have done this. you take front brake calipers and rotors and install on the rear. you do lose the ebrake with this. most threads i have read on this have been outdated and most pictures lost in the process.

so here's my documentation. lucky for me, i still have my rear c5 suspension parts laying around. first thing i read was the bracket will hit the ebrake backing plate. it does by about 1/4". so you can grind the bracket down to clear it, or just push it into place, slightly bending the backing plate. here are pictures of that.

in the third picture, you can see there is plenty of room to grind the bracket down without interfering with the bolt depth.
Attached Images
   
__________________
the alignment guy
mrr23 is offline   Reply With Quote
Unread 08-02-2017, 08:55 PM   #2
mrr23
The Alignment Guy
 
mrr23's Avatar
 
Join Date: Aug 2007
Location: orlando, fl
Posts: 1,337
Name : Robert J Hinton
mrr23 is on a distinguished road
Default

now, for those wanting to keep the ebrake, you can use rear rotors and front brackets from a c6 z51. there is a little work needing to be done. with the thinner rotor of the z51, you have to do a couple things to prevent the inner pad from slipping out of the bracket.

https://www.corvetteforum.com/forums...post1585471818

Quote:
SacCityCorvette

I use C6 z51 rear rotors to retain the E Brake. Because the rotors are thinner compared to the front C5 rotors, I had to add a piece of .250" plate to the bracket. See pics. If you don't, when the pad gets about halfway worn down it will slip between the rotor and bracket. NOT GOOD! And DANGEROUS!
Attached Images
  
__________________
the alignment guy

Last edited by mrr23; 08-17-2017 at 08:07 PM.
mrr23 is offline   Reply With Quote
Unread 08-03-2017, 09:43 PM   #3
mrr23
The Alignment Guy
 
mrr23's Avatar
 
Join Date: Aug 2007
Location: orlando, fl
Posts: 1,337
Name : Robert J Hinton
mrr23 is on a distinguished road
Default

My brake rotors and pads arrived today. Power stop. So far I'm about 225.00 into this.
Attached Images
 
__________________
the alignment guy
mrr23 is offline   Reply With Quote
Unread 08-04-2017, 10:31 PM   #4
mrr23
The Alignment Guy
 
mrr23's Avatar
 
Join Date: Aug 2007
Location: orlando, fl
Posts: 1,337
Name : Robert J Hinton
mrr23 is on a distinguished road
Default

mock up of the rotor and caliper. tiny scrub noise coming from the backing plate without the caliper bracket on. very minor due to the angle of the rotor center section.
Attached Images
    
__________________
the alignment guy
mrr23 is offline   Reply With Quote
Unread 08-09-2017, 09:52 PM   #5
mrr23
The Alignment Guy
 
mrr23's Avatar
 
Join Date: Aug 2007
Location: orlando, fl
Posts: 1,337
Name : Robert J Hinton
mrr23 is on a distinguished road
Default

calipers painted and cleared by my friend at law dawg restorations
Attached Images
 
__________________
the alignment guy

Last edited by mrr23; 09-06-2017 at 08:39 PM.
mrr23 is offline   Reply With Quote
Unread 08-10-2017, 01:28 AM   #6
Rich Z
Internet Sanitation Engineer
 
Rich Z's Avatar
 
Join Date: Mar 2006
Location: Crawfordville, FL
Posts: 15,123
Name : Rich Zuchowski
Rich Z will become famous soon enoughRich Z will become famous soon enough
Default

Looking good!
__________________
Rich Z is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Callaway AeroWagen Corvette Shooting Brake Kit Revealed in the Carbon Fiber RSS Feed Corvette News Feeds 0 02-03-2017 11:41 PM
Wilwood 97-2004 Corvette Superlite 6R Big Brake Front Kit XP Motorsports Classifieds - Corvettes, Parts & Accessories 0 11-01-2012 08:13 AM
C5/C6/ZO6 Slotted Rotors & Hawk Brake Pad Packages XP Motorsports Classifieds - Corvettes, Parts & Accessories 0 10-21-2012 03:02 PM
Corvette Brake Rotors - Give Me A Brake RSS Feed Tech and How-To Articles 0 09-07-2010 05:42 PM
C5 brake pad swap... pewter99 Maintenance, Mods, & Tips 4 06-11-2006 10:05 PM


All times are GMT -4. The time now is 04:49 AM.


Powered by vBulletin® Version
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Page generated in 0.05473995 seconds with 12 queries
All material copyrighted by CorvetteFlorida.com and
the respective owners of the material posted.