The ALL Florida Online Corvette Club








Corvette Top Sites

Go Back   The ALL Florida Online Corvette Club > The Lobby > CorvetteFlorida Feedback!

      Photo Gallery Screen Saver!      

CorvetteFlorida Feedback! Site Help Needed | Admin Notices | General feedback about this site

Reply
Thread Tools Display Modes
Unread 10-13-2006, 05:58 PM   #1
Rich Z
Internet Sanitation Engineer
 
Rich Z's Avatar
 
Join Date: Mar 2006
Location: Crawfordville, FL
Posts: 15,123
Name : Rich Zuchowski
Rich Z will become famous soon enoughRich Z will become famous soon enough
Default CorvetteFlorida.com flyers!

OK, I have the design finished (I think...) and am printing out a bunch of samples on my own Epson 220 printer. Does a pretty decent job of it, so I may just do it this way rather than running the design to the printers. Besides, I've had this darn printer just sitting in my den taking up space, so I might as well put it to good use.

Thanks to Jim Kill for spurring me on with this by making the initial layout of the text and giving me incentive to run with the ball he handed off to me...

If anyone wants some of these to pass around at shows, please PM me with your mailing address. I just need to pick up some boxes to ship the flyers in and I can start sending them out.

Thanks!

__________________
Rich Z is offline   Reply With Quote
Unread 10-13-2006, 08:09 PM   #2
2Vettes
Senior Member
 
2Vettes's Avatar
 
Join Date: May 2006
Location: Lehigh Acres
Posts: 2,210
Name :
2Vettes is on a distinguished road
Default

Looks good! Send some down this way. I'll take them to the Roger Dean show in Cape Coral October 28th. I tried to print them off from your post but it was too wide for my printer...?? If you would email me one I'll see if I can print it off and have some printed down here.
__________________
Pretty much stock
2Vettes is offline   Reply With Quote
Unread 10-13-2006, 08:40 PM   #3
Rich Z
Internet Sanitation Engineer
 
Rich Z's Avatar
 
Join Date: Mar 2006
Location: Crawfordville, FL
Posts: 15,123
Name : Rich Zuchowski
Rich Z will become famous soon enoughRich Z will become famous soon enough
Default

I should be able to convert this to a PDF file. At least the program says so. Let me give that a whirl and see if it works. Getting ready to curl up with a bowl of popcorn right now and watch a movie, so it will be a couple of hours.....

Thanks.
__________________
Rich Z is offline   Reply With Quote
Unread 10-13-2006, 08:54 PM   #4
9T8Vette
Been around for awhile
 
9T8Vette's Avatar
 
Join Date: May 2006
Location: North Port Fl ,Franklin NC
Posts: 1,087
Name :
9T8Vette is on a distinguished road
Default

cool flyer I just save it as a pic. so i will make up some to pass around at the events i go to
.
9T8Vette is offline   Reply With Quote
Unread 10-13-2006, 09:53 PM   #5
2Vettes
Senior Member
 
2Vettes's Avatar
 
Join Date: May 2006
Location: Lehigh Acres
Posts: 2,210
Name :
2Vettes is on a distinguished road
Default

Quote:
Originally Posted by 9T8Vette
cool flyer I just save it as a pic. so i will make up some to pass around at the events i go to
.
Yeh, I figured that out after I posted the note.
Thanks!
__________________
Pretty much stock
2Vettes is offline   Reply With Quote
Unread 10-14-2006, 01:03 AM   #6
Rich Z
Internet Sanitation Engineer
 
Rich Z's Avatar
 
Join Date: Mar 2006
Location: Crawfordville, FL
Posts: 15,123
Name : Rich Zuchowski
Rich Z will become famous soon enoughRich Z will become famous soon enough
Default

Well darn..... I created the .PDF file, but it looks like crap when I try to print it. Looks good on the screen when I open it up in Acrobat, but the print result is just all shadows. Hmmm... Probably some important switch I missed somewhere.

BTW, I used a program called Art Explosion Publisher Pro to do the flyer. Seems to be very intuitive to use and really easy to work with. Didn't have to crack open the manual even once. On the other hand, I bought another package which I thought would be the better of the two and was severely disappointed. Broderbund's PrintShop ProPublisher version 22... I couldn't get that program to do ANYTHING I wanted it to at all. Wish I could take it back, but most places just won't take back software, no matter how bad it is.
__________________
Rich Z is offline   Reply With Quote
Unread 10-14-2006, 05:53 AM   #7
JIM KILL
TampaBay Vettes
 
JIM KILL's Avatar
 
Join Date: Aug 2006
Location: Tampa, Florida
Posts: 1,810
Name : Jim Kill
JIM KILL is on a distinguished road
Default HELP ON THE WAY

YOU MAY WANT TO MAKE THE LOGO SMALLER....YOU ARE STARTING TO SHOW THE "PIXELS".

IF YOU WANT TO SEND ME THE FINAL..IN ANY FORMAT...I CAN HELP AND PRINT FOR THE "ULTIMATE CORVETTE PARTY".

"WE ALL ARE A TEAM HERE AND WE ALL CAN PITCH IN AND HELP!!!"

HAVE YOU TALKED TO "FERMAN" ABOUT A SPONSOR LOGO AND PAGE? CALL "TOMMY".
JIM KILL is offline   Reply With Quote
Unread 10-14-2006, 06:56 AM   #8
MADN3SS
Senior Member
 
MADN3SS's Avatar
 
Join Date: Apr 2006
Location: Largo, FL
Posts: 1,914
Name :
MADN3SS is on a distinguished road
Default

I guess I showed up late to the party. I just replied to your PM Rich. Sorry.

Looks good.
__________________


'01 QS Corsa Touring exhaust with Tiger Shark tips. LG LT headers with X-Pipe, Hurricane intake w/ CF HF Power Duct, L.E.D. tail lights and shorty antenna. Lowered on stock bolts. Black Motorsports. FRC TOM tuned. NCM member 36741
MADN3SS is offline   Reply With Quote
Unread 10-14-2006, 07:10 AM   #9
9T8Vette
Been around for awhile
 
9T8Vette's Avatar
 
Join Date: May 2006
Location: North Port Fl ,Franklin NC
Posts: 1,087
Name :
9T8Vette is on a distinguished road
Default

Bro i am always a day late dollar short
9T8Vette is offline   Reply With Quote
Unread 10-14-2006, 01:10 PM   #10
Rich Z
Internet Sanitation Engineer
 
Rich Z's Avatar
 
Join Date: Mar 2006
Location: Crawfordville, FL
Posts: 15,123
Name : Rich Zuchowski
Rich Z will become famous soon enoughRich Z will become famous soon enough
Default

Quote:
Originally Posted by JIM KILL
YOU MAY WANT TO MAKE THE LOGO SMALLER....YOU ARE STARTING TO SHOW THE "PIXELS".

IF YOU WANT TO SEND ME THE FINAL..IN ANY FORMAT...I CAN HELP AND PRINT FOR THE "ULTIMATE CORVETTE PARTY".

"WE ALL ARE A TEAM HERE AND WE ALL CAN PITCH IN AND HELP!!!"

HAVE YOU TALKED TO "FERMAN" ABOUT A SPONSOR LOGO AND PAGE? CALL "TOMMY".
Unfortunately I have not been able to contact the guy who originally did my logo for me. Now it prints out fine from the original file I created, but bear in mind the image I posted here is NOT the original file.

Anyway, I tried exporting the file as a larger image, so try downloading this one to see if it appears better when printed:

http://www.corvetteflorida.com/pics/cfl_flyer.jpg

I also have a .TIF image on the server, but bear in mind that this is a 32 meg file! -> http://www.corvetteflorida.com/pics/cfl_flyer.tif

If anyone also uses the Publisher Pro 2.0 software, you can utilize the work file itself if you want it. -> http://www.corvetteflorida.com/pics/cfl_flyer.npp

As for "Ferman", no I haven't approached them. I have sent out a few requests for sponsors, but thus far results have not been encouraging to continue in that effort. I suppose the site just isn't large enough to attract advertisers. Yet.

Thanks.
__________________
Rich Z is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sponsor advertising on CorvetteFlorida.com Rich Z CorvetteFlorida Feedback! 16 04-11-2010 01:52 AM
New to CorvetteFlorida.com Maalox Welcome Room 22 06-10-2008 09:41 PM


All times are GMT -4. The time now is 12:23 PM.


Powered by vBulletin® Version
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Page generated in 0.05140090 seconds with 11 queries
All material copyrighted by CorvetteFlorida.com and
the respective owners of the material posted.