2008 Z06 Silver 2LZ H/C For Sale
45000 miles
Brought the car back in Sep. 2014 from Stingray Chevrolet in Plant City, FL, Clean Carfax, Clean Title in hand. Sliver 2LZ with black interior. Has Bose speakers, Navigation, HUD, and heated seat. All mods have about 4000 miles, all the fluids are fresh. (Changed trans, and diff fluid Feb. 2017)
Over 25k invested
Feel free to ask any question!
I could be reached at 954-683-9Zero68
Car is located at Coral Gables FL 33146
Asking 41.5k as it is.
CCW and Brembo BBK along was 13k new, still can get 5k out of them if I take those off. But i want the new owner has the whole package
Engine:
-585whp/515wtq on 93oct Tuned at Redline Motorsport (Stock 2.5in diameter muffler)
-Mahle pistons 13:1CR
-Fasterproms ported/milled cylinder heads
-Bronze valve guides
-Katech Ti/Mo intake/exhaust valves
-Katech Billet Belt Tensioner
-ATI Super Damper 10%
-C5-R timing chain
-High lift valve springs
-Cadillac Racing lifters
-ARP head studs
-ARP 2000 rod bolts
-Clevite rod and main bearings
-Fasterproms ported intake manifold
-Fasterproms ported throttle body
-KN Cold Air intake
-MSD Coil kit
-Aviaid dry sump tank insert
-Improved Racing Dry Sump Oil Pan Baffle
-Improved Racing Oil Cooler Kit (Setrab Series 1, 65-row oil cooler, 180 Thermostat, AN-10)
-Lingenfelter expanded Dry sump oil tank +3qt
-Dewitts radiator
-Turn one power steering pump and pully
Exhaust:
-Kooks 2” Long tube Headers
-Kooks 3” Catless X-pipe
-LG GT4 mufflers (3in diameter)
-Koolmat tunnel heat shield
Driveline:
-Katech LS9X clutch
-Katech Remote Bleeder
-Tilton master/slave cylinder kit
Suspension:
-LG G2 coil-overs (Bilstein Shocks with 650F, 600R Hypercoil springs)
-Vansteel 38mm Sway bars (currently took off)
-Vansteel Delrin Bushing on all 8 control arms
Brakes/Wheels/Tires:
-Brembo GT 6pot 380F, 4pot 355R BBK
-Hawk DTC-70 pads (like new)
-Brembo stainless brake lines
-CCW Corsair C140 18X11F 18X13R
-Toyo R888 315/30/18F 335/30/18R (like new)
Others
-ZR-1 Style front splitter
-Tinted side markers
-LG rear tow hook
-Shark bar harness bar
-Pfadt Engine and Transmission mount
-DRM power steering shaft bushing
-Driveshaft Shop drive shaft bushing
335/30/18 R888 in the back
18 in wheel over 15 in brake, I really want to keep these wheels, but my stock wheels just wont fit over these Brembo GT 380 brakes
315/30/18 R888 in the front, oh yes
good memories
Will slowly goes up a bit, depends on how soon i can sell it
Katech Belt tensioner and Dewitts radiator
Heat shield on Fire wall too
currently have the stock air box, but I do have a KN airbox as well, if the buyer want, I can though it in there.
I also have a brand-new in box Anderson Composite "WORLD CHALLENGE" STYLE VENTED CARBON FIBER HOOD, if buyer is interested I could put it in with the car for 1500. (I’ve paid 2000 for this)
And Stock 18/19 wheels with NT05R for 600 local pick up.:smash:
Source...