View Single Post
Unread 10-05-2010, 07:58 PM   #8
navy2kcoupe
!ereH nI depparT m'I pleH
 
navy2kcoupe's Avatar
 
Join Date: Jan 2007
Location: 25 miles south of Boston, MA. Also have a house in Dunedin FL.
Posts: 1,927
Name : Andy Anderson
navy2kcoupe has disabled reputation
Default

Quote:
Originally Posted by RevXtreme 1 View Post
A vac pump won't do it, you will need either a trans flush machine or you can disconnet one of the trans cooler lines and run a ube from it into a 1 gal container. It takes 2 people but you can flush the entire trans this way, but need to be carefull so the pump dosen't suck air. Hook it up as described, have someone in the car start it and idle. It won't take long so as soon as 1 gal is about out have them shut it off, pump in 4 qts new fluid & repeat 3 times and the entire trans/converter will be flushed. The pump draws the fluid from the pan, through the filter, and through the TC before sending it o the cooler so it all gets changed this way. Then drop the pan & replace the filter & gasket and your done.
Thanks, but N-O-P-E! Not For Me! I'm one of those guys that knows when to call in the cavalry. I would pay more for the haz-mat crew to clean up my mess than I would for someone who knows how, to do it.
Andy (planning on staying clean)
__________________
Andy Anderson - PROUD-VIETNAM-VETERAN.
VIETNAM VETERANS CORVETTE CLUB - FOUNDING MEMBER #1
https://sites.google.com/site/vietna...scorvetteclub/
navy2kcoupe is offline   Reply With Quote