2008 Corvette z06 3lt
25k miles Second owner. Purchased bone stock in January 2021. All modifications done at 22k miles July 2021
Car made 605rwhp SAE (before changes) and has been a 9.96 @139 (on 93 pump). Still has more in it with seat time. Tuned by Rob Williams (Vendetta Speed)
Modifications include
- SBE
- Stock casting heads worked by Greg Good. CNC’d, Milled .030, Oversized 2.24 titanium intake valves, 1.615 exhaust valves. Pac1207x valve springs, CHE grunion upgrade, Cometic head gaskets for parallel cooling, ARP hardware throughout.
- HPC’s “The Hulk” camshaft
- Johnson 2110r lifters
- Msd atomic intake ported by Greg Good and retrofitted to allow 112 tb
- Nick Williams 112mm throttle body
- Haltech air intake
- American Racing 2’’ headers, and 3’’ catless X-pipe both ceramic coated
- Msd wires
- Mighty Mouse solutions catch can
- Deatschwerks 90lb Injectors and 415 fuel pump
- Dsx tuning flex fuel sensor
- Complete racetronix fuel system with hellcat 525 pump
- Msd fuel rails
- McLeod Rxt1200 clutch
- ECS transmission/diff brace
- Tick performance billet clutch master cylinder
- Aem wideband (mounted in glove box, only used for data logging purposes. Will come with a single gauge pod for dash)
- Brand new Hanhook non run flats all the way around
- Drag pack includes 18x5 Weld Ventura with 26x6 Mickey Thompson front runners. 17x11 Weld Ventura single bead lock with 315/35/17 Mickey Thompson Et street R
I’m sure I’m missing some. Car is dead reliable, and would drive anywhere. Everything works as it should. Combo has roughly 3k street miles and 20-30 trips down the track.
Clean title and carfax in hand
Asking $50,000 as is or best realistic offer. Can sell with or without drag pack to cut cost. Located in Deltona, Florida
Source...