[mickeystoysz16]

Well it is not quite a professional paint correction detail but it is good for a truck and came out better than I expected and the surface is smooth as glass. I will post some pics later. But basically took me all day yesterday. I used mostly Meguires retail products that you can get at Autozone or Walmart. I started with Meguires gold class wash and microfiber sponge as a first wash. Because I use my truck on the job I had a lot of asphalt splatter in the wheel wells and lower rockers and quarter panels. I used a bunch of bug and tar remover as well as mineral spirits to remove all the black spots off the paint. Because of the chemicals I used I decided to do a wash again because I did not want that stuff under the polish and wax. I have never used a clay bar before so I went ahead and clayed all of the painted surfaces and could not believe the difference. I am very pickey about keeping my truck clean so it was not that bad to begin with, but I was amazed at the difference after claying. Following the clay bar I used Megures step 2 polish (keep in mind I do not have a polisher so EVERYTHING is done by hand) followed by two coats of Meguires carnuba wax. I finished up with applying tire foam to the tires, using mineral spirits to clean the chrome bumbers, and finally Armor All on all of the plastic parts, door handles, mirrors, bumpers, etc... I still have the interior to do vacuum, armor all and glass cleaner, but short of doing a correction to remove the swirl marks I could not be happier how well it turned out. P