|
Z06Fever! Well, why not? Having one of these toys is definitely an illness for which there is no cure, so let's talk about this specific malady. |
|
|
05-29-2008, 04:14 AM
|
#1
|
Member
Join Date: Feb 2008
Location: Pinellas Park,FL
Posts: 41
Name :
|
Car is pulling right .. please help
After i purchased the new set of tires (goodyear eagle F1 GSD3s) took it to the Sears and had an alingnment ..and i noticed that the car was pulling right(slightly but it was still there) ,took the car back and asked them about that ,they told me they did the alignment properly but i wasn't convinced so i 've got full refund and took my car to the local chevy dealership ..service guy looked at the print out told me the alignment is fine ,took the car out for a test drive and said "car is slighlty moving to the right , it might be road crown .. i wouldn't bother" .. he also told me that he had a mustang and his car is doing the same thing ..is that really normal? the reason i'm asking you is b/c i drove the wife's car (subaru impreza)on the same exact road and it seemed like it was going straight unlike my Z...is it because i got wider tires and it makes that road crown pull more obvious?then again it's not pulling like crazy but it's so annoying..thanks in advance
__________________
Z0 S1CK ;)
|
|
|
05-29-2008, 06:06 AM
|
#2
|
Corvette,GM Classic Freak
Join Date: May 2007
Location: Vero Beach FL/Old Fort NC
Posts: 1,052
Name : I'm Not Post'n in BOI
|
Quote:
Originally Posted by glamcem
After i purchased the new set of tires (goodyear eagle F1 GSD3s) took it to the Sears and had an alingnment ..and i noticed that the car was pulling right(slightly but it was still there) ,took the car back and asked them about that ,they told me they did the alignment properly but i wasn't convinced so i 've got full refund and took my car to the local chevy dealership ..service guy looked at the print out told me the alignment is fine ,took the car out for a test drive and said "car is slighlty moving to the right , it might be road crown .. i wouldn't bother" .. he also told me that he had a mustang and his car is doing the same thing ..is that really normal? the reason i'm asking you is b/c i drove the wife's car (subaru impreza)on the same exact road and it seemed like it was going straight unlike my Z...is it because i got wider tires and it makes that road crown pull more obvious?then again it's not pulling like crazy but it's so annoying..thanks in advance
|
There are several things tha can make a car pull,and it still be within spec's!! Crown of the road can,as so can a bad tire,air pressure and other factors!!But the biggest thing I've found is Lazy alignment men or non experienced technicians that don't really know or understand what the hell their doing!!!!I call them Toe and Go Artists!! Post your year of vehicle, tire pressure of each tire and the read out so I can look at it and see what things look like,maybe I can help,I assume it's a Corvette!! I've had to shift suspension cradles and other components to get a good alignment!! Most alignment guys just won't go the extra mile because there paid by production and not by the hour!!
PS I'm a Experienced Frame and Alignment Technician with over 30+ years!!
__________________
junk!!
|
|
|
05-29-2008, 06:30 AM
|
#3
|
Member
Join Date: Aug 2007
Location: JAX FL
Posts: 891
Name : Bob Fletcher
|
Junkman is spot on
|
|
|
05-29-2008, 08:46 AM
|
#4
|
Sinister C4
Join Date: Jan 2007
Location: Largo, FL
Posts: 1,223
Name : Eric G
|
I have a lot of issues with Road Crown in both my vette and my lowered truck. Especially in Pinellas County (Belcher is one of the worst)! I'd certainly post your alignment read out for gmjunkie to take a look at.
I know of a great shop on 66th street that comes highly recommended for vettes. They charge by the hour, my alignment was around $175, but it's worth it to me to make sure my alignment is correct.
|
|
|
05-29-2008, 09:46 AM
|
#5
|
1980 Black Beauty
Join Date: Mar 2008
Location: lakeland,fl
Posts: 129
Name :
|
GM JUNKIE GOT IT . AGAIN CHECK TIRE PRESSURE A TIRE CAN LOOK GOOD AND WONT HAVE ENOUGH PRESSURE ON IT AND CHECK IT WHEN IS COLD HATE WHEN A CAR PULLED ALSO SOMETIME IS NOT VISISBLE BUT A TIRE CAN BE MORE WORN OUT THAN THE OTHERS . JACK IT UP AND SPIN THE TIRES TO SEE IF YOU SEE ANY DIFERENCE ALSO PENNY CHECK ON THE TIRE LEFT ,CENTER , RIGHT SIDES OF THE TIRES .
|
|
|
05-29-2008, 01:09 PM
|
#6
|
'69 Vert/'01 Vert/'04 Z16
Join Date: May 2006
Location: Ft. Myers, Fl.
Posts: 1,450
Name :
|
The GY GS D3s are great tires. I put them on my '01 vert and took off the runcraps. What a difference. When the GY Supercars are ready to replace on my Z06, I will probably replace them with the D3s as well. Good luck with your alignment issues.
Rich
__________________
[b]2010 ZR1
Crystal Red/Two Tone Titanium
2014 Z51 7 Speed Convertible
Laguna Blue/Grey/Grey
|
|
|
05-29-2008, 01:12 PM
|
#7
|
Member
Join Date: May 2008
Location: Tallahassee/Blountstown
Posts: 715
Name :
|
go with GMJUNKIE
We have had TONS of cars come in after getting an alignment done at a dealer and it "just not feel right" to the owner. And we still have them come in to this day.
It is always best to take it to a Corvette specialist , you can tell a BIG difference when it is done properly.
It may cost a little more but it is well worth it!!
There are MANY things it could be and GMJUNKIE is right about most of them not caring !!!
Good luck!! I am sure GMJUNKIE will be able to fix you up.`
|
|
|
05-29-2008, 01:47 PM
|
#8
|
Member
Join Date: Feb 2008
Location: Pinellas Park,FL
Posts: 41
Name :
|
Quote:
Originally Posted by gmjunkie
There are several things tha can make a car pull,and it still be within spec's!! Crown of the road can,as so can a bad tire,air pressure and other factors!!But the biggest thing I've found is Lazy alignment men or non experienced technicians that don't really know or understand what the hell their doing!!!!I call them Toe and Go Artists!! Post your year of vehicle, tire pressure of each tire and the read out so I can look at it and see what things look like,maybe I can help,I assume it's a Corvette!! I've had to shift suspension cradles and other components to get a good alignment!! Most alignment guys just won't go the extra mile because there paid by production and not by the hour!!
PS I'm a Experienced Frame and Alignment Technician with over 30+ years!!
|
hi i've got an 03 Z06 , i set my tire pressures based on factorys specs(33psi all around)..and yes i checked my tires pressures and they're fine..i forgot to mention that i took my car to 3 different places with the print-out in my hand (sears alignment) and they said alignment looks fine .i don't know maybe they were just lazy, also asked some performance alignment shop and quoted $250 (?) for 4 wheel alignment ...and he mentioned that the car might still pull right after the alignment so i basically couldn't sacrifice my $250 to get a better alignment but still have to deal with that annoying thing ..thanks for the input
__________________
Z0 S1CK ;)
|
|
|
05-29-2008, 02:10 PM
|
#9
|
Corvette,GM Classic Freak
Join Date: May 2007
Location: Vero Beach FL/Old Fort NC
Posts: 1,052
Name : I'm Not Post'n in BOI
|
Quote:
Originally Posted by glamcem
..and he mentioned that the car might still pull right after the alignment so i basically couldn't sacrifice my $250 to get a better alignment but still have to deal with that annoying thing ..thanks for the input
|
Well he ain't No Alignment man then!! (Classic to cover ones A$$ if they find that things need shifted!! They want Easy $$ not what they have to work for! )If it pulls somethings not right!!Granted the road can have something to do with it,But if you have a light constant right pull,Either you have a bad tire or the car isn't set up right!! It happens that sometimes a New Tire is bad but I'd bet on the alignment! I'd like to see the print out. Please
__________________
junk!!
|
|
|
05-29-2008, 02:52 PM
|
#10
|
Member
Join Date: Feb 2008
Location: Pinellas Park,FL
Posts: 41
Name :
|
Quote:
Originally Posted by gmjunkie
|
that's what the sears guy told me i took it to the goodyear store to see if anything is wrong with the tires (wanted to use goodyear warranty) and they said there shouldn't be a problem with tire ..maybe they were just lazy and i ordered the part from tirerack so they didn't wanna help me out since i didn't buy my tires from them..i was so sick to go to the sears and go back to the goodyear store..i looked at my garage and couldn't find the print out i think i lost it ..pfff
__________________
Z0 S1CK ;)
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 02:00 AM.
|