|
Maintenance, Mods, & Tips Mods | Tips | Repairs & Troubleshooting |
|
|
07-18-2009, 01:05 PM
|
#1
|
Member
Join Date: Oct 2006
Location: New Smyrna Beach & West Milford, N.J.
Posts: 804
Name :
|
Rear Gear Ratio
I have an '06 convertible manual trans and would like to know what the gear ration is on the rear end.
All my window sticker says is Limited Slip Differential which I think means posi-traction.
I ordered the Vette and did not include any rear end options (if there were any).
Lou
|
|
|
07-18-2009, 01:54 PM
|
#2
|
Senior Member
Join Date: May 2006
Location: Ft Walton Beach, Fl.
Posts: 1,405
Name : Mark Dalton
|
I won't swear to this but I think most manuals come with a 3.42 rear gear. But mines an '02 so that may have changed.
|
|
|
07-18-2009, 02:43 PM
|
#3
|
Senior Member
Join Date: Mar 2007
Location: On the road
Posts: 2,117
Name :
|
Option codes as follows:
GM8 2.56
GM9 3.63
GU6 3.42
They only made 8 with the GM9 and all 8 were Z06 cars.
__________________
I Have Noticed That A Lot Of People Demanding Free Stuff Are Not Wearing Work Boots.
|
|
|
07-18-2009, 04:37 PM
|
#4
|
Member
Join Date: Oct 2006
Location: New Smyrna Beach & West Milford, N.J.
Posts: 804
Name :
|
Quote:
Originally Posted by 85vette
Option codes as follows:
GM8 2.56
GM9 3.63
GU6 3.42
They only made 8 with the GM9 and all 8 were Z06 cars.
|
Yes, I saw the option codes but couldn't find it in my paperwork.
There were 8,127 convertibles with a 2.56 and 3,024 with a 3.42.
Am thinking I have a 2.56 because of the low rpms at high speeds but maybe Mark is right and it is a 3.42.
I was just wondering what I had. I am thinking of doing a couple of upgrades to beef up the horsepower and thought it would be a good thing to know what the gear ration was.
Thanks for the comments.
Lou
|
|
|
07-18-2009, 07:46 PM
|
#5
|
Senior Member
Join Date: Mar 2007
Location: On the road
Posts: 2,117
Name :
|
Are the the RPO codes not on a sticker on your storage tray doors? (They are on the C4's.)
__________________
I Have Noticed That A Lot Of People Demanding Free Stuff Are Not Wearing Work Boots.
|
|
|
07-19-2009, 01:26 AM
|
#6
|
Team Afterhours Member
Join Date: Dec 2007
Location: Bradenton, Fl.
Posts: 765
Name : Corey Metz
|
3.42 for ALL manual trannies, no optional rear axle ratio. 2.56 for automatics unless you order the optional 2.73 ratio or get the Z51 option, which gets you the 2.73 ratio as part of the Z51 package.
stolen from the big forums.
__________________
Beware the snake bite.....
|
|
|
07-19-2009, 10:48 AM
|
#7
|
Member
Join Date: Oct 2006
Location: New Smyrna Beach & West Milford, N.J.
Posts: 804
Name :
|
Quote:
Originally Posted by LS2POWA
3.42 for ALL manual trannies, no optional rear axle ratio. 2.56 for automatics unless you order the optional 2.73 ratio or get the Z51 option, which gets you the 2.73 ratio as part of the Z51 package.
stolen from the big forums.
|
Thank you!!
85Vette, Thank you also. I will look in the glove box and see it the RPO codes are there.
Lou
|
|
|
07-19-2009, 12:44 PM
|
#8
|
Senior Member
Join Date: Mar 2007
Location: On the road
Posts: 2,117
Name :
|
Quote:
Originally Posted by LS2POWA
3.42 for ALL manual trannies, no optional rear axle ratio. 2.56 for automatics unless you order the optional 2.73 ratio or get the Z51 option, which gets you the 2.73 ratio as part of the Z51 package.
stolen from the big forums.
|
I'm curious, what is the code for the 2.73? I only find the three above mentioned gear ratios (2.56, 3.63, and 3.42) on the Bowling Green RPO sheet. It does list the Z51 six speed as MZ6 versus the standard six speed as a MM6, but makes no mention of a 2.73 gear set.
__________________
I Have Noticed That A Lot Of People Demanding Free Stuff Are Not Wearing Work Boots.
|
|
|
07-19-2009, 01:39 PM
|
#9
|
Team Afterhours Member
Join Date: Dec 2007
Location: Bradenton, Fl.
Posts: 765
Name : Corey Metz
|
Dont know the code, but I know it was an option. I spent a lot of time looking at C6s. It was only available for the Z51s with the A6 though, unless you knew your local dealer well which had ties to the factory.
__________________
Beware the snake bite.....
|
|
|
07-19-2009, 07:34 PM
|
#10
|
Member
Join Date: Oct 2006
Location: New Smyrna Beach & West Milford, N.J.
Posts: 804
Name :
|
Thanks to you guys, my quest has ended. I found the tag in the glove box.
It has the GU6 RPO code for a 3.42 rear.
I asked my friend to look at his tag, he has an auto '06 with the Z51 option, and his RPO code is GM8 for a 2.56 rear.
Like you guys, I have not seen a RPO code for a 2.73 rear. The following web page has the 2006 Vette Production Options. www.vettefacts.com/C6/2006.aspx
I looked at the www.vettefacts.com/c4/1985.aspx but did not see a RPO code for the rear.
Thanks again.
Lou
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 12:54 PM.
|