F/S ‘94 CORVETTE COUPE – Bracket & Street Corvette
I am selling my 1994 Corvette Coupe. I have owned it since March 2001. I am the third private owner of the car and I have used it as a “driver”, “bracket drag racer” and high speed “autocross” Corvette during the time I have owned it. It has the original stock bottom end LT1 motor and original 4L60E automatic transmission (rebuilt by Pro-Built & Tony’s Corvette Shop). The rear end is a Dana 44 with Richmond 3.73 ratio gears. Currently the Corvette is set-up as a bracket racer, with a couple of minor changes (high-flow “cats” are on the car) it can be easily put back on the street. All of the needed parts to put it back on the street come with the Corvette and are included in the sale except for the Dana 36 rear end and OEM exhaust system. Some other miscellaneous speed parts and OEM parts also go along with the sale of the Corvette. Also included in the sale are street wheels and tires, two sets of Drag Radials with wheels and the front end skinnies.
The car is Arctic White with black interior. It has never been hit nor had any body repairs or re-painted. The stock paint job is in pretty good condition and shines up very nicely after a good wash and wax. The black interior is in very good condition except for the driver’s side floor pan carpeting. All of the OEM equipment and gauges are in good working order and the A/C blows good cold air. The original equipment options on the Corvette include Driver & Passenger Power Sport Seats, Removable Roof Panel (Blue tint) and the Stereo system with CD/Delco-Bose. The Corvette has 59,000 miles on it currently and when I purchased the car in 2001 it had approximately 41,000 miles. The stock wheels are also included in the sale.
ENGINE: list of modifications; (stock bottom end LT1 motor)
Breathless Performance/Vortex Ram “Cold Air” Box Intake with K& N air filter
March Under-Drive Crank pulley
52mm BBK Throttle Body
Granatelli Mass Airflow unit and Sensor with smooth surface airflow connector tubes
Performance Choice adjustable fuel regulator
Ford Performance 40-lb. fuel injectors
Blueprinted Jeg’s opti-spark unit (work by Perry Ignitions)
Summit starter blanket
Taylor 8mm Spiro-Pro ignition wires
LT1 GM Performance Intake - ported & polished, matched to heads, work by CarTech
LT1 GM Performance Heads - ported & polished, matched to intake, work done by CarTech, all head flow machine work performed by CarTech
Heads have 3 angle performance valve job, machine work by Jordan Performance
Comp Cams LT1 motor camshaft (custom grind) 230/244, .544/.5576 112 LSA (power range 2,000 to 6200 RPM)
LT4 1.6 ratio GM Performance roller rockers
LT4 GM Performance lifters
Patriot Performance Keepers, locks and titanium retainers
Patriot Performance Valve Springs
ARP Head Bolts and engine fasteners and bolts
Melrose Long Tube Headers – “SmoothFlow” coated headers with X-Pipe and “Hi-Flo Cats”; 1.75” primary header tubes with 3” collectors, system transitions down from 3” after Hi-Flo cats to 2.5” to hookup to Corsa mufflers.
ADDITIONAL MODIFICATIONS:
Dana 44 rear end housing & axles with Richmond 3.73 gear ring & pinion set
4L60E Automatic Transmission with Pro-Built “Street/Strip” performance package
B&M Automatic Transmission Cooler (3-quart additional capacity)
Automatic Transmission Temperature Gauge (mounted in center console cup holder)
Hurst Lin-Loc system
Rear Axles Loops from DragVette Manufacturing
Summit Products “Drive-Shaft Loop” (2” steel loop)
160 degree HyperTech thermostat with matching fan controls for 185 degree fan start
Custom build 4-point roll bar by Human Manufacturing (black powder coat w/red cushion wraps)
REI 5-point mounted safety belts system (lap belt/shoulder harness/groin belt)
9.5” custom built 3400 Stall Speed convertor from Pro Torque
Competition Equipment 3-Way front drag shocks (90/10-80/20-60/40 settings)
Moroso DS-2 front runners (26X4.5X15) mounted on Weld Pro Stars (5 X 15) 2-piece aluminum wheels
Mickey Thompson ET Street (26X11.5X17) tubeless rear drag radials mounted on Black Aluminum Grand Sport 5-Spoke (17X10.5X55mm) wheels -and-
Goodyear Eagle DOT P275/40R/17 Drag Radials mounted on Centerline Stars (style #74) polished aluminum 2-piece rotary forged 17X9.5 wheels –and-
C4 ZR1 5-spoke styled chrome wheels 2-17X9.5X36mm & 2-17X9.5X55mm with Goodyear Eagle “Gatorbacks” 2-17X255/45 and 2-17X285/40 street tires
Current custom dyno-tune by Mayhem Motorsports (Raleigh, NC)
362 RWHP & 376 maximum torque
¼ Mile Best: 11.92 ET – 112.75 MPH – 1.565/60’ (November 2010 at Fayetteville Motorsports Park)
All modification work made to Corvette by professional shops including Tony’s Corvette Shop (Gaithersburg, MD), Carolina Speed Shop (Conway, SC) and Mayhem Motorsports (Raleigh, NC). It’s been a good Corvette to own, easy and fun to race and I’ve had some success winning events and cash with it over the past few years.
SALE PRICE: $14,350 with all above listed equipment & miscellaneous OEM parts taken off of Corvette when above modifications were performed. Parts such as: original LT1 Heads & Intake, front sway bar and mounting towers, jack and spare wheel/tire & carrier, crank pulley, air cleaner box, 48mm throttle body, original shocks, etc.
– or –
$16,000 for Corvette and 2002 Peron 22’ open tandem axle trailer, solid diamond plate steel deck, duck tail with hide-a-way ramps, electric brakes with emergency battery pack, full fenders, 6-spoke painted 15” wheels with tongue mounted aluminum locking toolbox 18’x48”x26”; Trailer comes with all needed tie-downs and ratchet straps, towing receiver w/ ball and with load leveler bars and trailer mounted bracket mounts.
CONTACT INFORMATION
(843)399-3273 -OR- (301)346-7740 -OR-
1wilson@sccoast.net
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Source...
F/S ‘94 CORVETTE COUPE – Bracket & Street Corvette
Linear Mode
