2008 Air Intake/Cleaner

jcb_njb · 11-17-2008, 10:21 AM

I would like to inspect my Air Intake/Cleaner filter on my 2008 Coupe. However, the manual refers to remove screws but I see no screws. Is there something I have to remove first to get to the screws?

jformato · 11-24-2008, 05:09 PM

Loosen the 5/16 or 8mm tightening clamp on the TB and remove the whole assembly. You will need to disconnect the MAF. It has a little slide fitting in the connector there that needs to be slid toward you before you pinch the connector to remove it. If not you will not be able to pinch the end to disconnect the MAF. Pull it out and then you can easily get to anything you need to.
Jeremy formato