Up And Running Hot - Tech
Our hot C5 Corvette twists the dyno one last timeWell the end of the road for Project C5X has finally come. As most of you know, this project began almost 2 1/2 years ago, and we have been on a long journey to upgrade Project C5X on a lot of different levels. That journey included a Mid America Motorworks (Performance Choice) interior upgrade, Pfadt sway bars and coilovers, an American Car Craft stainless steel accessories package, a Baer brake upgrade, basic engine add-ons including Dynatech headers, Mid America Motorworks exhaust and air intake, an Elite Engineering tunnel plate, and an MTI shifter install. Almost all of our installs, and 100 percent of our dyno work, was done by Next Level Performance in Altamonte Springs, Florida, and Geoff Skorupa and crew have done a superb job! We covered lots of editorial ground, but what we really want to do now is to bring this project to a close by installing the last go-fast parts on the car and produce some real horsepower on the dyno.inline_mediumwraptextright28477150/techarticles/corp_1005_c5_corvette_heads_camcorp_1005_01+2000_chevrolet_corvette+heads_and_cam.jpgTrue
Photo Gallery: C5 Corvette Heads And Cam - Project C5X Gets A Top-End Upgrade - Corvette Fever Magazine
Photo Gallery: C5 Corvette Heads And Cam - Project C5X Gets A Top-End Upgrade - Corvette Fever Magazine
Read More | Digg It | Add to del.icio.us
More...
Our hot C5 Corvette twists the dyno one last timeWell the end of the road for Project C5X has finally come. As most of you know, this project began almost 2 1/2 years ago, and we have been on a long journey to upgrade Project C5X on a lot of different levels. That journey included a Mid America Motorworks (Performance Choice) interior upgrade, Pfadt sway bars and coilovers, an American Car Craft stainless steel accessories package, a Baer brake upgrade, basic engine add-ons including Dynatech headers, Mid America Motorworks exhaust and air intake, an Elite Engineering tunnel plate, and an MTI shifter install. Almost all of our installs, and 100 percent of our dyno work, was done by Next Level Performance in Altamonte Springs, Florida, and Geoff Skorupa and crew have done a superb job! We covered lots of editorial ground, but what we really want to do now is to bring this project to a close by installing the last go-fast parts on the car and produce some real horsepower on the dyno.inline_mediumwraptextright28477150/techarticles/corp_1005_c5_corvette_heads_camcorp_1005_01+2000_chevrolet_corvette+heads_and_cam.jpgTrue
Photo Gallery: C5 Corvette Heads And Cam - Project C5X Gets A Top-End Upgrade - Corvette Fever Magazine
Photo Gallery: C5 Corvette Heads And Cam - Project C5X Gets A Top-End Upgrade - Corvette Fever Magazine
Read More | Digg It | Add to del.icio.us
More...