• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

ac belt C5

ClockworkC5

ClockworkC5

droog
i just changed out my accesory belt and was going to do the a/c. it looked a little more burried and it started raining so i decided to play with it during better weather. what is the easiest way to do it? looks like taking off the thermostat housing and going from top. but then again ive never done it before. also why 2 belts? why not just one?
 
Help!!!

Top:
Put your socket on the pulley tensioner as if you were going to tighten it - and do just that. As it rotates the pulley, it will relieve the tension on the belt, allowing you to slip it off.


Bottom:
The A/C belt can be a bit tricky. Tackle it from underneath using the same technique.

Hope that helps!!
:D JIM :D
 
Last edited:
hey Jim. good to hear from you. thanks for the info. i ussually go straight to the source (greg) But the maintenance sections Been a little slow so i figured id post up. hope the z is treating you right.
 
You must log in or register to reply here.
Back
Top