• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

any info would help

0

06c6corvette

New member
Im looking at installing a magna charger on my C6 any opinions good or bad would steer me in the right direction,ive done all the mods to support the blower if it would be reliable in an every day driving use.
 
When I was looking for a forced induction add on for my C5Z, I also considered the Magnacharger among everything else that was available. I kept a sort of mental comparison sheet as to the pros and cons to everything I was considering.

On the pro side of the MagnaCharger:
  • Very reliable
  • Very good *oomph* at low and mid rpm ranges
  • Install didn't seem very difficult
  • Very nice *bling* factor under the hood

Con side:
  • Need to replace the hood (plus have the new hood painted), which adds about $1,000 to the price of getting this unit
  • Been some issues of engine overheating noted
  • ALL of the added weight (80-100 lbs) is sitting up front.
  • Power tends to fall off at high RPMs
  • Heat soaking can be an issue

Hope that helps....
 
Get with Robert (Pewter99) either here or on the other forum. He has had one on his C5 for quite a while now. I'm sure he can fill you in on the in's and out's.

If you're in the area of Insty Tune & Lube on N. Dale Marby in Tampa on Saturday evenings between about 5-8 pm, you'll likely find one or 2 up there as well:thumbsup:

*EDIT* Ok, reading is fundamental!! I see you're in Clermont.
 
Personally, If i was going to go with forced induction, I'd roll with an ATI procharger. http://www.procharger.com/GM/gm_auto.shtml
They spool when not in use, so it doesn't hurt the vettes wonderful fuel economy, yet delievers a ton of power when you plant your foot. I was looking at one for a while for my truck, but I'll just be going with a stroker motor. If you want a professional opinion, I'd contact the Corvette Doctor in Clearwater. (727-299-9041) http://www.corvettedoctor.com/
 
06c6corvette blower options.

Thank you for all your input this site rules im on my way to ordering from Lingenfelter ltd $ 6500.00 and i have al ready installed the new hood it looks premo.:thumbsup:
 
06c6corvette said:
Thank you for all your input this site rules im on my way to ordering from Lingenfelter ltd $ 6500.00 and i have al ready installed the new hood it looks premo.:thumbsup:
Click to expand...

Glad we could help regardless of what you choose:thumbsup:

Welcome to the site and lets see some pics before and after:thumbsup:
 
maggie charger install

I like it so far great power,gas milage hasent changed to much. pictures are posted in photo gallery. im ready for Ecklers sun and show.100+ HPwith only 5%psi of boost,hope to see all at show im # 34.:wavey:
 
06c6corvette said:
I like it so far great power,gas milage hasent changed to much. pictures are posted in photo gallery. im ready for Ecklers sun and show.100+ HPwith only 5%psi of boost,hope to see all at show im # 34.:wavey:
Click to expand...
Way to go! :thumbsup:
I like that hood, it looks great!:yesnod:
 
You must log in or register to reply here.
Back
Top