• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Convertible Top Cleaner???

Ragg Topp...you can purchase a combo pkg from Eckler's with both cleaner and protector most vette owners swear by this product.:yesnod:
 
Ragg Topp all the way. You can also get it at www.Autogeek.net. I would check all sites recommended for best price. All beware of shipping charges. They appear to be going up due to increased fuel cost I think.
 
Ragg Topp...you can purchase a combo pkg from Eckler's with both cleaner and protector most vette owners swear by this product.:yesnod:

There is a thread around somewhere talking about problems with using the conditioner/sealer. It seems that a few people were not letting their top completely dry before applying the sealer. Sealing in moisture, which leads to fungal growth, and areas of fabric decay. Remember... If you are going to use a sealer on your top, after you wash it, use a "Shop Vac" to extract most of the water, then let it dry overnight in the garage then out in the direct sun for at least an hour. Just make sure that the top is completely DRY. Then apply the sealer.
 
There is a thread around somewhere talking about problems with using the conditioner/sealer. It seems that a few people were not letting their top completely dry before applying the sealer. Sealing in moisture, which leads to fungal growth, and areas of fabric decay. Remember... If you are going to use a sealer on your top, after you wash it, use a "Shop Vac" to extract most of the water, then let it dry overnight in the garage then out in the direct sun for at least an hour. Just make sure that the top is completely DRY. Then apply the sealer.

I totally agree. Recommendation is 24 hours of drying time before applying sealer. That also means avoiding retracting the top during the drying time.
 
There is a thread around somewhere talking about problems with using the conditioner/sealer. It seems that a few people were not letting their top completely dry before applying the sealer. Sealing in moisture, which leads to fungal growth, and areas of fabric decay. Remember... If you are going to use a sealer on your top, after you wash it, use a "Shop Vac" to extract most of the water, then let it dry overnight in the garage then out in the direct sun for at least an hour. Just make sure that the top is completely DRY. Then apply the sealer.
:iagree:
 
It works!


getattch-1.jpg
 
Well my Raggtopp kit finally arrived, after cleaning then drying for 24hrs, I applied the sealer, 3 coats 20mins. between each, at first I was a bit concerned because of the way it seemed to just sit on the surface but, the next day, Wow, it looks like a brand new top!:crazy03: Great product,:thankyou2:everybody for the tip.:thumbsup::yourock:
 
Back
Top