• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Degreeing your cam.

RevXtreme 1

RevXtreme 1

www.revxtreme.com
The importance of "degreeing" a cam. A good example is a customer that did his own heads/cam recently and brought it in for a tune. It made about 15 rwhp less than he expected (another point....all combo's will NOT produce the same results). He had installed the cam dot-to-dot and when we dereed it it was 8 degrees off. Very rarely do I see a cam that when it's installed "dot-to-dot" is right on. Allthough most are only a few degrees off and will run fine, I have seen some as far as 12 degrees off. Read more from other builders here:

http://www.need2speed.com/vb_forums/showthread.php?t=64737
 
You must log in or register to reply here.
Back
Top