Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Installing the oil seperating catchcan on the 2010 SS.

Here is a picture of the intake manifold after 900 miles:

Here is the lower bolt on the tensioner where the bracket mounts:

Bracket & can bolted to the tensioner:

Approx. 5" of the hard plastic line is removed here:

And here where the outlet connects to the intake manifold vacuum nipple:

And the finished install:

:cheers:

Top