• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Thanks.....

pewter99

pewter99

This place cracks me up
to all who made Bostons last night....great turnout (16-18?)...met some new folks and saw some that I havent seen in forever (Sean) :eek:

Jim it was nice to see you outside of a TBV meeting :yesnod:

Hope we can do better next month
 
Sounds like a great time:thumbsup:

By the time I got home, looked at this mountain of paperwork, and sat down for a minute, I just didn't want to leave:lmao:

With My associates passing and all that has to be done, I just couldn't make it last night:(

I'll definately shoot for the next local one. Please keep us informed:thumbsup:

Thanks Robert:icon_cheers:

Gordon
 
glamcem said:
it was nice to meet you guys :) we should do that again :thumbsup:
Click to expand...

we will..next month.....different place......I will post it up a week or so in advance.

If you PM me your email address I can just add you to that so if you miss a thread...
 
pewter99 said:
to all who made Bostons last night....great turnout (16-18?)...met some new folks and saw some that I havent seen in forever (Sean) :eek:

Jim it was nice to see you outside of a TBV meeting :yesnod:

Hope we can do better next month
Click to expand...

Yes....I had a nice time meeting a few other Corvetters. We all were talking about alot of other stuff, rather than Corvettes and it makes for a nice change of pace. I left alittle early, it was a school night.:lmao:

When I left some Guy with his girlfriend decided he wanted a piece of the "Zee". He had a 2007 Black (Stock) paddle shift. Had him from the light to 105 MPH on Anderson. :hehehe: Then as I pulled forth in the Clutch stuck to the floor. :eek: We met at the night light and agreed that I cleaned his clock. :thumbsup: I think we are due for a new clutch soon. :ack2:

Any suggestions on a New "Zee" Clutch from you experts???
(TYPE and MODEL NUMBER)

:hehehe: Jim :hehehe:
 
JIM KILL said:
Yes....I had a nice time meeting a few other Corvetters. We all were talking about alot of other stuff, rather than Corvettes and it makes for a nice change of pace. I left alittle early, it was a school night.:lmao:

When I left some Guy with his girlfriend decided he wanted a piece of the "Zee". He had a 2007 Black (Stock) paddle shift. Had him from the light to 105 MPH on Anderson. :hehehe: Then as I pulled forth in the Clutch stuck to the floor. :eek: We met at the night light and agreed that I cleaned his clock. :thumbsup: I think we are due for a new clutch soon. :ack2:

Any suggestions on a New "Zee" Clutch from you experts???
(TYPE and MODEL NUMBER)

:hehehe: Jim :hehehe:
Click to expand...




Jim,

to be honest with you the stock Z06 clutch is probably the best bet for the driving you do. There was alot of talk about going to the C6Z06 clutch (LS7) but with that you need a new slave and some other stuff plus they say it glazes pretty easy. Both of us have the Z06 clutch in our cars and we are doing fine....mine has held up extremely well even with the blower 460rwhp/489 tq.

I can hook you up with a good vendor who will beat anyones price on the clutch...lemme know :)
 
JIM KILL said:
Then as I pulled forth in the Clutch stuck to the floor. :eek: We met at the night light and agreed that I cleaned his clock. :thumbsup: I think we are due for a new clutch soon. :ack2:
Click to expand...

Jim,

Try replacing your clutch fluid. This is a common problem caused by dirty fluid. I think there is a thread or two about it in the Maintenance section....
 
pewter99 said:
we will..next month.....different place......I will post it up a week or so in advance.

If you PM me your email address I can just add you to that so if you miss a thread...
Click to expand...

Robert, if you don't mind, please put it on the calendar for next month. If you want, since this is a monthly event, I can make it a sticky in the events section as the month approaches as well. Let me know?

Glamcem, check the calendar. Events should be there. I'll try to make sure all events are noted if you guys will pm me the information when you get it:thumbsup:
 
as soon as I know where etc I will post it.....I am currently reviewing a few places. I have criteria such as price, parking and the ability for the place to serve us in a timely fashion. Parking is high on my list.
 
JIM KILL said:
Then as I pulled forth in the Clutch stuck to the floor. :eek:
:hehehe: Jim :hehehe:
Click to expand...


My clutch stuck for a long long time. Then I noticed a big difference in the clutch pedal, so I knew the clutch was bad.

After the new Z06 Clutch, the pedal still sticks :shrug01:
It stuck Wed night to be exact...
then something fell on my foot :eek:
 
Yellow said:
My clutch stuck for a long long time. Then I noticed a big difference in the clutch pedal, so I knew the clutch was bad.

After the new Z06 Clutch, the pedal still sticks :shrug01:
It stuck Wed night to be exact...
then something fell on my foot :eek:
Click to expand...

yeah I think it was that clutch return spring that alot of people removed...as long as it is driving ok.......
 
pewter99 said:
as soon as I know where etc I will post it.....I am currently reviewing a few places. I have criteria such as price, parking and the ability for the place to serve us in a timely fashion. Parking is high on my list.
Click to expand...

:thumbsup:Good enough:thumbsup:let me know and we'll make it a sticky month to month in the events section.
 
Thanks bro. With Richies death and the work load, it's just been a long damned week:( By the time I got home, and looked at my paperwork, I just couldn't drag my butt out the door!

Had my buddy/employees wake tonight (funeral is tomorrow) and it really makes you think.

I promise, I'll try to make the next Tampa one...it's been too long...

Take care ladies and gents:wavey::thumbsup:
 
You must log in or register to reply here.
Back
Top