• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Whats the C5's stock height

9T8Vette

Been around for awhile
Hey need to know what the stock height for the front and rear.If you could please tell me the measurement from the ground to the top of fender that would be helpful .I have slammed my car and forget what the original height was:shrug01: .I want to lift it back up to stock height to fit some 20s .Beside the ride has sucked every since i lowered the the car. Looks awesome but rides like sh it.:ack2:
 
If I remember, I'll measure mine for you. The height is stock so that should help. How about the measurement from the ground to the inside lip of the wheel well? That will be easier to get accurately rather than from the top of the fenders.
 
I have a 2001 Z06 that is stock with the height never being altered. It is very difficult to measure to the top of the fender accurately, so as Rich suggested I measured from the floor to the bottom of the wheel lip in the center, the rear measures out at 29" and the front measured out at 27".
 
Nytro said:
I have a 2001 Z06 that is stock with the height never being altered. It is very difficult to measure to the top of the fender accurately, so as Rich suggested I measured from the floor to the bottom of the wheel lip in the center, the rear measures out at 29" and the front measured out at 27".
Thanks Nytro :wavey: i was just wanted to put the car back to stock height and those measurements will do the trick . Thanks again for the Replys:thumbsup:
 
Back
Top