• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

'88 Vette Steering Rack Needed

Mr. Blue

Mr. Blue

New member
Where is the most cost effective place to buy a rebuilt/or new steering rack & pinon for a 1988 Vette.:shrug01:
That is what I need.
I have a core for exchange if required for a re-manufactured unit exchange.
e-mail contact: MrBlue@cfl.rr.com
Glenn "Mr. Blue"
 
Mr. Blue said:
Where is the most cost effective place to buy a rebuilt/or new steering rack & pinon for a 1988 Vette.:shrug01:
That is what I need.
I have a core for exchange if required for a re-manufactured unit exchange.
e-mail contact: MrBlue@cfl.rr.com
Glenn "Mr. Blue"
Click to expand...
Whats yours doing??Or Not doing??:shrug01:
 
gmjunkie said:
Whats yours doing??Or Not doing??:shrug01:
Click to expand...

It's developed a good bit of 'slack' back & forth in the steering wheel.
While driving over rutted roads, it tends to 'wander' back and forth.
It's a 1988 rack from a Z-51 equipped Vette that I bought back in 1989 for parts and have been running ever since with those hugh 345/35ZR-15 tires on the front. :nonod:
Thanks for asking if you could help! Glenn
 
Hi Glenn, there's a seller on Ebay that exchanges cores for ones he rebuilds. They are $150.00 with your core. IKERDS Corvette Suspension Products has been an ebay seller since 2001 and has a 99.8 satisfaction rating. Go to Ebay Motors and type in "Corvette Steering Rack" and it will take you right to it. It also list the codes that match the tag on your unit so you're sure to order the correct one. His shipping is reasonable too, $16.83 from Indiana to my address in Florida. I have not done business with him yet, but plan to in the future.
 
85vette said:
Hi Glenn, there's a seller on Ebay that exchanges cores for ones he rebuilds. They are $150.00 with your core. IKERDS Corvette Suspension Products has been an ebay seller since 2001 and has a 99.8 satisfaction rating. Go to Ebay Motors and type in "Corvette Steering Rack" and it will take you right to it. It also list the codes that match the tag on your unit so you're sure to order the correct one. His shipping is reasonable too, $16.83 from Indiana to my address in Florida. I have not done business with him yet, but plan to in the future.
Click to expand...

Thank you for the info. Glenn
 
Mr. Blue said:
It's developed a good bit of 'slack' back & forth in the steering wheel.
While driving over rutted roads, it tends to 'wander' back and forth.
It's a 1988 rack from a Z-51 equipped Vette that I bought back in 1989 for parts and have been running ever since with those hugh 345/35ZR-15 tires on the front. :nonod:
Thanks for asking if you could help! Glenn
Click to expand...
The inner tie rods are replaceable under the billows,takes about 30-40 min a side!!I can change both in 1 1/2 hrs with plenty of time to smoke a couple ciggs!!:thumbsup::thumbsup:

http://www.partsamerica.com/Product...ptset=A&searchfor=Tie+Rod+End+-+Driver,+Inner
 
Mr. Blue said:
Thanks for the information. I've checked into the inner tie rod ends being worn out instead of replacing the entire rack. Should be much cheaper and less work overall. :thumbsup:Glenn
Click to expand...
Damn, That weird!! The TRW and the McQuay Norris were both Priced below $30 when I posted that Link!!:banghead: The TRW's were $27.99 and McQuay-Norris were $28.59!! I pay $42.34 for Moog and $26.50 for Preferred Parts Depot (Chinese) Here!! I called and got the Price just Now!!:thumbsup::thumbsup:
 
Go with the good stuff!

gmjunkie said:
Damn, That weird!! The TRW and the McQuay Norris were both Priced below $30 when I posted that Link!!:banghead: The TRW's were $27.99 and McQuay-Norris were $28.59!! I pay $42.34 for Moog and $26.50 for Preferred Parts Depot (Chinese) Here!! I called and got the Price just Now!!:thumbsup::thumbsup:
Click to expand...

Thanks for checking the prices for me. :thumbsup:
I've learned a long time ago not to cut corners on this project. ALWAYS get the best parts you can afford, so I'll probably go with the Moog. No way I'd go for the foreign junk!!:NoNo::thumbsdown:
 
I got my 89 sport rack from a Place in Tampa. Great price, I got it quick and it came highly recomended from a fellow C4 owner. I'll see if I can track down the name of the place for you. It probably doesn't do much, but I got the poly bushings too when I got my rack. I'd ask that the rubber bushing not be installed if you go with the poly bushings though. I had to pay a machine shop $20 to remove the new rubber bushing so I could install the poly one.
 
shakedown067 said:
I got my 89 sport rack from a Place in Tampa. Great price, I got it quick and it came highly recomended from a fellow C4 owner. I'll see if I can track down the name of the place for you. It probably doesn't do much, but I got the poly bushings too when I got my rack. I'd ask that the rubber bushing not be installed if you go with the poly bushings though. I had to pay a machine shop $20 to remove the new rubber bushing so I could install the poly one.
Click to expand...

That info would be great to help me make a decision. I'm not pressed for time, so that helps.:wavey:
 
shakedown067 said:
Oh crap. I forgot to get that info for you. Sorry about that. Where did you end up getting the rack from?
Click to expand...

No problem.
All the help from everyone I got made it so easy.
I bought it thru Advance Auto Parts.
After of day of cleaqning off the radiator black the remanufactuer slapped on with a brush, I then painting it and clear coated it as it should be, it looks and works great. Under $200.00
Glenn
 
You must log in or register to reply here.
Back
Top