RevXtreme Hot Cam Package Special!

[RevXtreme 1]

--------------------------------------------------------------------------------

This is complete, turn-key out the door:

Comp/RevXtreme custom grind 232/236 cam (or any custom grind less than .600 lift)
Comp 918 springs
New valve seals
Comp Titanium retainers
Seats
Manley PR-4130 5/16 push rods
New water pump gaskets
new frnt cover gasket
New heavy duty timing chain
New frnt main seal
New crank bolt
New AC Delco oil filter
7 qts Mobil 1 10w30 (or other weight of choice)
Complete Dyno tune with street driveability
A/C evac & recharge

All this for $1947 plus tax.

Call JP to schedule: 813-628-0080

[CHASZ51]

What will this cam do for my 06 a6 with no mods? I'm looking for lowend power.

[RevXtreme 1]

Originally Posted by CHASZ51

What will this cam do for my 06 a6 with no mods? I'm looking for lowend power.

Call & talk to JP or Kyle and they will get you what you can expect. With the A6 they will recomend a different grind than the MN6. 813-628-0080

[chris308]

is there a cam that falls within this package deals spec that will give good power NA and FI down the road?

I am eventually going to FI, working on a blower setup as we speak....but i digress.

I just don't want to do any mods that will hender my future performance goals...if that makes sense??

Also, i decide to get a cam done, can you guys pin the crank at the same time?

Any options for roller rockers, shop provided or customer provided?

Sorry for all the questions...

[ynkedad]

Originally Posted by CHASZ51

What will this cam do for my 06 a6 with no mods? I'm looking for lowend power.

Awww Mayunnnnn... I wanted to READ it!!!
I hate phones!

[RevXtreme 1]

Originally Posted by chris308

is there a cam that falls within this package deals spec that will give good power NA and FI down the road?

I am eventually going to FI, working on a blower setup as we speak....but i digress.

I just don't want to do any mods that will hender my future performance goals...if that makes sense??

Also, i decide to get a cam done, can you guys pin the crank at the same time?

Any options for roller rockers, shop provided or customer provided?

Sorry for all the questions...

Yes, we generally go with a lower lift cam for FI so we can pick one that will work for both, but it won't be the most powerful NA to begin with. Yes to the pinning & yes to the rockers. We like Harland Sharp adjustables, but Comps, Yella terras & Cranes are also good.

[RevXtreme 1]

Originally Posted by ynkedad

Awww Mayunnnnn... I wanted to READ it!!!
I hate phones!

OK, all I can do is post other C6 results that we have done, a good indicator but not a guarantee since each of these cars are different despite being mass produced. I'll post soom tomorrow when I get back in the shop.

[RevXtreme 1]

Originally Posted by CHASZ51

What will this cam do for my 06 a6 with no mods? I'm looking for lowend power.

You really need CAI & headers for a cam to be worthwhile....and with a stock TC the resulta for lowend will be minimal. Probably better to save up for all the mosa at once than to do a cam w/out the rest.

[Bradzvette]

If a lot of you are like me, there’s not 1800 dollars just sitting around doing nothing. The word budget is used every payday for a lot of us, which got me thinking, I can spare 400 dollars or so every month myself, but not 1800 dollars in one month. I could save the money in the bank but then something always seems to come up and the savings account gets depleted.

So, to close this deal out in the next couple of weeks, I have convinced the powers that be at RevXtreme to take four (4) payments to lock in this special pricing. Once you have made your fourth payment your cam will be installed. This guarantees you the price we have for this sale.

Obviously the word layaway comes to mind right away, but in reality you are locking in the price for this deal and you can take four months to pay on it. It’s all in how you want to look at it.

There are no charges or hidden fees. No interest charges either. Everything will be installed on your car after the last payment is made. Only need two or three months, that’s fine too.

Please understand that nothing gets installed until the entire sale package is paid for plus tax. But come December or January your car could be making some serious power.

I’m sure a lot of you would love to have a cam in your car and I hope this helps you get that done.

Don't wait too long to jump on this, as the sale will not be on for much longer, and once it's gone, it's gone for good.

C5/C6 .......................... four payments of $486.75 plus tax

Call JP our sales manager at (813) 628-0080 and tell him you want the 4 pay cam special right away to lock in your price before this spectacular deal ends. He can take your payment over the phone or we can send you a Paypal invoice. That way you can take your time and decide what cam is right for you and your vehicle.

We take Visa/MC, Paypal and checks.

Thank you

Brad

[ynkedad]

Originally Posted by RevXtreme 1

--------------------------------------------------------------------------------

This is complete, turn-key out the door:

Comp/RevXtreme custom grind 232/236 cam (or any custom grind less than .600 lift)
Comp 918 springs
New valve seals
Comp Titanium retainers
Seats
Manley PR-4130 5/16 push rods
New water pump gaskets
new frnt cover gasket
New heavy duty timing chain
New frnt main seal
New crank bolt
New AC Delco oil filter
7 qts Mobil 1 10w30 (or other weight of choice)
Complete Dyno tune with street driveability
A/C evac & recharge

All this for $1947 plus tax.

Call JP to schedule: 813-628-0080

Anyone know if this (cam etc) will have an effect on my warranty?