• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

700r4 shifting into OD

K

kip younger

New member
My newly installed, used 700r4 (from a 1990'ish GMC truck) seems to shift ito over drive too soon. Driving around 40 mph or so, it seems to want to shift into and out of over drive, instead of iether one or the other. Is this a TV cable adjustment? If so, which direction; further out, or further back in? Thanks - kip
 
kip younger said:
My newly installed, used 700r4 (from a 1990'ish GMC truck) seems to shift ito over drive too soon. Driving around 40 mph or so, it seems to want to shift into and out of over drive, instead of iether one or the other. Is this a TV cable adjustment? If so, which direction; further out, or further back in? Thanks - kip
Click to expand...

TV cable adjustment is critical and the wrong adjustment can damage the trans in no time. You really need a good 700R4 tech to help you in person.

If you come to the shop we will do it for free.:thumbsup:
 
Thanks for the offer. I live a long way from where you are however. I have read and re-read the instructions for setting the tv cable; which I basically intrepet to be - press in the slider button, manually open the throttle to wide open, and allow the slider to move forward as it needs to. The problem here is that the slider always moves completely forward, leaving slack in the cable when the throttle returns to idle. I have it set at this time, but of course I could be on thin ice here also, if its not right.... thanks - kip
 
You must log in or register to reply here.
Back
Top