• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

ATTN Xtreme Motorsports

Thanks

I would like to thank you and Jon for helping me figure out this issue.
I would also like to publicly endorse this company and their ability to do outstanding work.

In addition to these injectors I also sent them a set of stock LS3 injectors and had the flowed to 60LBS/HR, not only were they professional I had the injectors back within 3 days from the day I dropped them off.
I installed them in a 2008 Corvette we did with a Pro Charger,Melrose Long Tubes,Random cats and X-Pipe,with a magnaflow Cat Back. I have to say this was the easiest car I have ever had to tune. I made 3 pulls and I was done !! The car drove like it was stock again.
If anyone needs any injectors cleaned or reflowed I strongly suggest you use the Fuel Injector Connection. Thanks again guys !!
:thumbsup::thumbsup::thumbsup::thumbsup:

I am trying to re size the dyno sheet so I can post it here also.
 
Last edited:
Thanks very much for the kind words. I hope your customer is happy. The ones you sent in came out at 60lb on the nose. The ones you sent in to be tested... well you see the results.

I'm here to help anyone needing anything injector related here, rebuilds, cleanings, replacements, we do it all.

Again, I'm really happy the 60's worked well for you. I called to find out an update but got your voicemail hehe.

~Rich
 
That sounds like great service.

xtrememotorsports said:
I would like to thank you and Jon for helping me figure out this issue.
I would also like to publicly endorse this company and their ability to do outstanding work.

In addition to these injectors I also sent them a set of stock LS3 injectors and had the flowed to 60LBS/HR, not only were they professional I had the injectors back within 3 days from the day I dropped them off.
I installed them in a 2008 Corvette we did with a Pro Charger,Melrose Long Tubes,Random cats and X-Pipe,with a magnaflow Cat Back. I have to say this was the easiest car I have ever had to tune. I made 3 pulls and I was done !! The car drove like it was stock again.
If anyone needs any injectors cleaned or reflowed I strongly suggest you use the Fuel Injector Connection. Thanks again guys !!
:thumbsup::thumbsup::thumbsup::thumbsup:

I am trying to re size the dyno sheet so I can post it here also.
Click to expand...

That sounds like great service, 3 days is outstanding. Neal;)
 
You must log in or register to reply here.
Back
Top