FOR SALE:
2008 Chevrolet Corvette 1LT Supercharged
The car is very well taken care of and as hard as it is to believe due to the mod list it is never raced or abused. Currently 31,500 miles (I have owned it since 12k). Most of the mileage is highway from my long commute as I used the car as a daily driver. Car has a CLEAN Carfax, no accidents, and 100% clean title in hand. All work has been done by professionals ($30k+ in Parts + Labor in receipts). Car is a 6 SPEED MANUAL, Comp blower cam and Supercharged with an A&A V3 SI kit. Tuned by the best in the business, Redline Motorsports in South Florida for drivability (by Howard the Corvette magician). Approx. 600whp on the stock pulley. Wide body is OEM GM parts, not aftermarket. No real rush in selling but if you are looking for a fast, clean toy this is it. Price is $31,500. I do not deal in checks, wire transfers, etc. Cash only and local pickup only in South Florida. I'm not interested in shipping or scams of any sort. Please no lowball offers as they will be ignored. I got 17k miles out of my last set of Nitto NT05's, that should tell you have the car is driven (babied).
*The rear lowering bolts are noisy and could use replacement or grease.
*Aftermarket Autometer fuel pressure gauge has stopped functioning. Either a bad gauge or sender, have not had time to diagnose.
Short list of modifications, there is probably a lot more I'm forgetting.
A&A Vortech V3 SI Supercharger Kit (POLISHED)
Pioneer AppRadio 4 hooked up using a Metra In Dash kit and Crux harness with USB
West Coast Corvette 8 Black Shift **** (Corvette Insignia)
Dyntech Headers installed by 21st Century Muscle Cars
GM Widebody Spoiler OEM
Comp Cam Blower Cam package installed by East Texas Muscle Cars
Borla Exhaust
West Coast Corvette Car Cover
RPS Twin Disc Clutch
Full Window tint installed by Richmond Performance (KSE)
Raptor Shift light Installed by EFI Performance
Tuned by Redline Motorsports for Street drivability
Z06 Rear Differential + Output Shaft OEM
Black Replica Z06 Wheels (Corvette Garage)
Nitto NT05 335/30/19 Rear Tires/ Firestone Firehawk RFT Front
HID Fog Light Kit
ThermoTec Wrapped Console for less interior heat
Supercharged Fender Emblems (Range Rover)
Black Billet Oil Cap with Passthrough by Hawks Motorsports
Carbon Fiber Arm Rest Cover
West Coast Corvette Jacking Pucs (Leave in)
Factory Z06 Rear Wide Booty Conversion (OEM PARTS)
Brey Krause Fire Extinguisher Mount + Kiddie Fire Extinguisher w/ Custom Jake Emblem
Autometer A Pillar Gauge Pod w/ Fuel Press & Boost Gauges (2 Sets BLACK and SILVER)
Corvette Mods Rear Tail Light Tint/Side Light Tint/Reverse Light Tint (Acrylic)
MGW Shifter
GM Wheel Locks
RaceMesh front Grille
Carbon Fiber Emblem Overlay (Vinyl)
Lloys Matts Rear Matt from Corvette Mods
Weathertech Black Matts from Corvette Mods
Opticoat applied in 2015 by After Hours Detailing
(2) GM Key Fobs Included
Car can be seen in Fort Lauderdale during weekdays as I still drive it. NO TEST DRIVES unless cash in hand.
Source...
2008 Chevrolet Corvette 1LT Supercharged
The car is very well taken care of and as hard as it is to believe due to the mod list it is never raced or abused. Currently 31,500 miles (I have owned it since 12k). Most of the mileage is highway from my long commute as I used the car as a daily driver. Car has a CLEAN Carfax, no accidents, and 100% clean title in hand. All work has been done by professionals ($30k+ in Parts + Labor in receipts). Car is a 6 SPEED MANUAL, Comp blower cam and Supercharged with an A&A V3 SI kit. Tuned by the best in the business, Redline Motorsports in South Florida for drivability (by Howard the Corvette magician). Approx. 600whp on the stock pulley. Wide body is OEM GM parts, not aftermarket. No real rush in selling but if you are looking for a fast, clean toy this is it. Price is $31,500. I do not deal in checks, wire transfers, etc. Cash only and local pickup only in South Florida. I'm not interested in shipping or scams of any sort. Please no lowball offers as they will be ignored. I got 17k miles out of my last set of Nitto NT05's, that should tell you have the car is driven (babied).
*The rear lowering bolts are noisy and could use replacement or grease.
*Aftermarket Autometer fuel pressure gauge has stopped functioning. Either a bad gauge or sender, have not had time to diagnose.
Short list of modifications, there is probably a lot more I'm forgetting.
A&A Vortech V3 SI Supercharger Kit (POLISHED)
Pioneer AppRadio 4 hooked up using a Metra In Dash kit and Crux harness with USB
West Coast Corvette 8 Black Shift **** (Corvette Insignia)
Dyntech Headers installed by 21st Century Muscle Cars
GM Widebody Spoiler OEM
Comp Cam Blower Cam package installed by East Texas Muscle Cars
Borla Exhaust
West Coast Corvette Car Cover
RPS Twin Disc Clutch
Full Window tint installed by Richmond Performance (KSE)
Raptor Shift light Installed by EFI Performance
Tuned by Redline Motorsports for Street drivability
Z06 Rear Differential + Output Shaft OEM
Black Replica Z06 Wheels (Corvette Garage)
Nitto NT05 335/30/19 Rear Tires/ Firestone Firehawk RFT Front
HID Fog Light Kit
ThermoTec Wrapped Console for less interior heat
Supercharged Fender Emblems (Range Rover)
Black Billet Oil Cap with Passthrough by Hawks Motorsports
Carbon Fiber Arm Rest Cover
West Coast Corvette Jacking Pucs (Leave in)
Factory Z06 Rear Wide Booty Conversion (OEM PARTS)
Brey Krause Fire Extinguisher Mount + Kiddie Fire Extinguisher w/ Custom Jake Emblem
Autometer A Pillar Gauge Pod w/ Fuel Press & Boost Gauges (2 Sets BLACK and SILVER)
Corvette Mods Rear Tail Light Tint/Side Light Tint/Reverse Light Tint (Acrylic)
MGW Shifter
GM Wheel Locks
RaceMesh front Grille
Carbon Fiber Emblem Overlay (Vinyl)
Lloys Matts Rear Matt from Corvette Mods
Weathertech Black Matts from Corvette Mods
Opticoat applied in 2015 by After Hours Detailing
(2) GM Key Fobs Included
Car can be seen in Fort Lauderdale during weekdays as I still drive it. NO TEST DRIVES unless cash in hand.
Source...