• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Good Mechanic

sandman

New member
Does anyone one know of a good mechanic in the Jacksonville area or close to it. I have a mystery problem and cant seem to pin point it on any specific area. Thank You in advance
Sandman
 
Ask a local Corvette club is what I would do.:D

However, even that is not foolproof. Aaron Scott was recommended to me via a guy in the local Corvette club here, and that certainly did not end well for me.
 
Unfortunately, finding a good trustworthy and competent Corvette tech is apparently a pretty rare situation in just about any area.

I've heard a lot of people say that realistically, if you want to mod your car and make sure it is done right, YOU have to learn how to do it yourself. Obviously there is a good reason that many people recommend that as the only feasible solution. But unfortunately, it's just not practical for everyone.
 
Unfortunately, finding a good trustworthy and competent Corvette tech is apparently a pretty rare situation in just about any area.

I've heard a lot of people say that realistically, if you want to mod your car and make sure it is done right, YOU have to learn how to do it yourself. Obviously there is a good reason that many people recommend that as the only feasible solution. But unfortunately, it's just not practical for everyone.

Absolutely! The guy I mentioned has an extensive background in auto racing. He pretty much has seen it all. :thumbsup:
 
Back
Top