• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

rear axle nuts

Qman

New member
Take center cap off rear wheels you will see a 33mm nut , tighten to 118 foot lbs. mine were loose. I used a piece of string on a corner of center cap and pulled it off holding it with a rag.:D
 
axle nut

Ms. AntiVenom said:
now just who are you calling an axle nut?


Is your car always that clean or did you prep it! its sooooo clean
I try to keep it that clean and my intake should be here today so I need to set a time and date for my custom tune. thanks:D
 
Mine were loose. Hate to have this happen...........

094_94.jpg


096_96.jpg


I read that drag racers are double nutting them to keep them tight. Seem to back off regularly if your pushing it. :thumbsup:

Thanks again for the heads up Q!
 
Back
Top