• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Thanks,

ynkedad

Wassup!!!
Does anyone have any suggestions on how to go about this?
What do you use?
What are the steps you take?
Please share your knowledge...:thumbsup:
 
Last edited:
ynkedad said:
Does anyone have any suggestions on how to go about this?
What do you use?
What are the steps you take?
Please share your knowledge...:thumbsup:
Is this a trick question.? :D
 
Alot of elbow grease and McGuiar's NXT wax should do the trick. :D Now, what was that question again. :ack2:
 
Sorry.. Engine Cleaning.

I posted this in the Dark on the back porch this morning, and as you's can tell by the two identical threads, I goofed up.:toetap05:

This is in regards to the Engine.. Any suggestions as to how to clean it up?

~Ray:sillyme:
 
ynkedad said:
Does anyone have any suggestions on how to go about this?
What do you use?
What are the steps you take?
Please share your knowledge...:thumbsup:

Well, most anything can be fixed by either duct tape or WD-40. If neither of those work, then a shaped charge of TNT will likely do it....... :lmao:
 
Go to their web site and at the top of the home page click on" detail videos.". there is alot of great info here..:thumbsup: www.adamspolishes.com If it is not real dirty use a 50/50 mix of water and Simple Green, an old paint brush, toothbrush, and lots of rags. Cover the fenders whatever method you use. I have not been brave enough to use water but alot of people have with no problems. I also use compressed air to blow off the hard to reach spots..
 
ynkedad said:
Does anyone have any suggestions on how to go about this?
What do you use?
What are the steps you take?
Please share your knowledge...:thumbsup:

Are we talking about Llama, Sheep & Goats again.......:lmao:
 
SteveK said:
Are we talking about Llama, Sheep & Goats again.......:lmao:
:lmao: Man...there's life beyond the Gutter Steve :rofl1:
But, if you insist...Is the Dog gonna be in it's bikini with you at the Ecklers show?:hehehe:

~Ray
 
Hi Ray,

If you want to clean up your engine bay. Take Cherry Bomb All purpose cleaner or Brown Royal diluted 1:2 and spray down your engine. Let it dwell about a minute or two and use high pressure water and rinse. You can use a air hose and blow out any residual water that is left behind.
Use caution doing this if You have an Optispark distributor.

You can then coat the plastic trim and hoses with a dressing like Aqua Gloss, Presto or Banna Breeze. These dressing are water based and have great resistance to heat.
Therefore keeping everything lubricated and pliable.

Cherry Bomb is a strong but safe cleaner. It will not streak Paint or wheels. Its can be diluted and will not hurt service labels in the engine compartment. Many Car washes and Detail shops buy it in 55 gallon drums. Its just as popular as Brown Royal. Hope this helps.:)


Joe-Flash Auto Detailing Products
 
Hey Joe you need to try and set up a detail party, and how-to... P.S. That Grape Gloss is some really great stuff.:thumbsup:
 
ynkedad said:
:lmao: Man...there's life beyond the Gutter Steve :rofl1:
But, if you insist...Is the Dog gonna be in it's bikini with you at the Ecklers show?:hehehe:

~Ray
No, he is into running around without clothes, so we leave him at home. :D
 
Flash man,

Thanks Joe for the tip:thumbsup: . I have all that I need then according to your list:thumbsup:


Stevek, That's one sick puppy you have there!:lmao:
10.gif

:rofl1:
 
Back
Top