Hi guys. I was looking to sell my GTR and buy a C7, but think it may be easier to trade it for a C7+Cash. Let me know if you are interested.
67k on the chassis, build is under 1000 miles. The only exterior/interior mod to the car is a Carbon Fiber lip on the stock spoiler. There is 1 small vertical crack on the front lip of the bumper. No other issues with the car. Car was tuned by Tim Bailey, and is estimated to be just under the 1,100hp mark.
3.8 crank
Manley 300m rods
cp HD pistons with .280 pins
arp main studs
fully ported polished Curt Brown heads
gsc valves springs retainers
t1 head gaskets.
Gsc stage 3 cams.
Ported polished. 1mm over sized valves
Buscher Catch Can
Jacks Drag 800 Trans
SBD 1200 Turbo kit with upgraded 3" inlets
Tomei Expreme Ti Exhaust
SBD Super Race Intercooler with wrinkle Red pipes
SBD SD Intakes in wrinkle red
4 Bar Map Sensor
Visconti FF Kit
Visconti SD Kit
Visconti Hardwire Kit
Visconti Dual 485 pumps/basket
ID 1700x Injectors
Please feel free to ask any questions. Car is located in SW Florida
$70,000
Source...
67k on the chassis, build is under 1000 miles. The only exterior/interior mod to the car is a Carbon Fiber lip on the stock spoiler. There is 1 small vertical crack on the front lip of the bumper. No other issues with the car. Car was tuned by Tim Bailey, and is estimated to be just under the 1,100hp mark.
3.8 crank
Manley 300m rods
cp HD pistons with .280 pins
arp main studs
fully ported polished Curt Brown heads
gsc valves springs retainers
t1 head gaskets.
Gsc stage 3 cams.
Ported polished. 1mm over sized valves
Buscher Catch Can
Jacks Drag 800 Trans
SBD 1200 Turbo kit with upgraded 3" inlets
Tomei Expreme Ti Exhaust
SBD Super Race Intercooler with wrinkle Red pipes
SBD SD Intakes in wrinkle red
4 Bar Map Sensor
Visconti FF Kit
Visconti SD Kit
Visconti Hardwire Kit
Visconti Dual 485 pumps/basket
ID 1700x Injectors
Please feel free to ask any questions. Car is located in SW Florida
$70,000
Source...